Hi Albert,
This question is solved another thread.
https://e2e.ti.com/support/amplifiers-group/amplifiers/f/amplifiers-forum/1313976/tl084-for-calculating-kai-square-confidence-level-degree-of-freedom/4998260#4998260
I appreciate your great help.
Best…
Part Number: TL084 Hi Team,
My air conditioner customer has some problems about the TL084 current acquisition circuit. (Circuit below and attached tina files)
The +/- 8V (maximum range) sin signal @60Hz comes from the Hall sensor, then it is inputted…
Part Number: TL084 Other Parts Discussed in Thread: TL054 , , LM2904 , TLV4172 , TLV4170 , OPA4209 , OPA4228 , OPA4192 , OPA4140 , OPA4197 , OPA4227 , I have a customer named 'Jiangmen Xingjiang steering gear', which engineer used LM2904AVQDRQ1 to replace…
Part Number: TL084 Other Parts Discussed in Thread: TL074 , OPA172 , OPA170 , TL081 , CD4046B
Good day,
I am currently working on an visual light communications project for my thesis. The TL084 is being used to amplify the signal on the photodiode end. The…
Part Number: TL084 Hi expert,
My customer is doing functional safety related analysis and may need quality data with 70% confidence level. But most data we direstly get from TI website is 60% confidence level. Could you take TL084 as an example on how…
Part Number: TL084 Hi team,
I have just design comparator using TL084ID , but it is not working now and i can not find the reason.
Is it ok to design the comparator with TL084ID?
Regards,
Lee
Part Number: TL084 Hello,
I was running an experiment to look at thermals on the TL084. When I take all four channels with a bipolar supply (+/-12V) and tie the inverting terminal to the output and the positive input to ground (0V) I am seeing temperatures…
Part Number: TL084H Other Parts Discussed in Thread: TL084A , TL084B , , TL084 Team,
does TL084H perform better with regards to short circuit compared to the other types TL084, TL084A and TL084B?
BR
Part Number: TL084 Other Parts Discussed in Thread: TLV9064 Hi Sir
input 3.3V sine wave
pin3 = 2.5V ,single power 5V
May I know why output voltage is minimum 1.5V