Part Number: TL103WA Hi, TI expert
I have an inquiry regarding the TL103WA.
Please inquire as the maximum rating for the entire pin is not shown on the datasheet.
1. When Vcc = 5V, can I check the Maximum Voltage Range and Maximum Current Range for each…
Part Number: TL103WA Hi team,
As below waveform, there are 600mV ripple observed in TL103 pin3. Would please you help analyze this? We have tried 2 pcs device. The results are the same.
The configuration:
Bias=12V, +24V=24V
D7, R43 are removed
Part Number: TL103WA Other Parts Discussed in Thread: LM358 , TL103W This part is being used on a siren/microphone product. When microphone is keyed, the PA does not enable. The signal makes it to the Microcontroller but voltages across Op-Amps are zero…
Other Parts Discussed in Thread: TL103WA , TL072 , LM358
I am using channel 2 of TL103WA as a unity gain buffer (non-inverting). Vcc is 5V, Vee is gnd.
The input is 0.45V. The output of the buffer is connected to junction of an 8.5K resistor and a 1k…
Part Number: UC3846 Other Parts Discussed in Thread: UC3842 , TL103WA i working built a 1.3kw (54.6v,25a) smps of full bridge topoloy. I want to have both constant current and constant voltage control.i have read somewhere that sg3525 is not use full for…
Part Number: OPA2244 Other Parts Discussed in Thread: TSM102 , TL103W , TL103WA , LM10 Hi,
Can you suggest OPA with a reference zener diode as a reference inside like TS4436 but with 12 Vin and up to 100uA current consumption.
Thanks
