Hi Noel,
Thank you for waiting. Please see reference below:
LMX2595.pdf
Please ignore refrence designators on PCB. They dont match to schematic. When LMX2595 is programmed by microcontroller, it takes around 250mA current. But LMX2595 heats up…
Edit: I had previously stated incorrectly that there was no model for the TPS73801-SEP. This was incorrect. The correct guidance can be found in the answer below highlighted in green.
Hi Raul,
The model for the TL1963A could be used as a rough stand…
Part Number: TPS7A84 Other Parts Discussed in Thread: TL1963A-Q1 , TPS74301 , LM1086 , LM317 Hi Experts,
When looking at the LDO thermal resistance, they are the same between TPS7A83/84/85. Then how do i choose the LDO based on input/output voltage…
Other Parts Discussed in Thread: TL1963A , BQ2002T , LM317 I am using the USB 5V to charge 3 NiMH batteries in series. The LM317 has a rather large dropout voltage and there are many new LDO regulators that reduce the dropout voltage to as low as 300mV…
Hidetoshi-san,
The ThetaJA is correct for both the TL1963A and TPS7A4501. As mentioned above, the ThetaJA can differ from one device to another even when they are using the same package.
Hi Mohamad,
The G3 is an indication of Green (RoHS & no Sb/Br) compliance, that was used > 10 years ago. The G3 suffix was created to help customers identify RoHS compliant devices while RoHS conversions were occurring. Today all TL1963A devices are…
Part Number: LM25180 Other Parts Discussed in Thread: LM5017 , LM25184 Dear Sir
Please confirm the circuit,
This circuit has no voltage output
The same issue lm5017 in circuit has the same problem
Please help to confirm
thank you
LM25184_LM5017_POWER_SCH…
Kengo,
The SN75162B should be an active TI device now.
PDN20240404000.3.pdf
We had a lot of customers who voiced concern about TI being the only producer for this device so the EOL notice was retracted and announced in April of 2024. The device…
Hi Ling,
Thanks for jumping in!
1) I'm pulling power from the USB bus via a microusb connector on the board and sending it to a TL1963A-33 LDO with a 100 uF electrolytic and 10 uF ceramic cap on the input side with an additional 10 uF and .1 uF on…
Hi, we have received the PCN retraction notice. Attached notice for ref. Would like to close the case now as my issue is resolved now. Thank you for your help and support. TXII-L-A0020566415-1.pdf
