Part Number: TL2575HV-05-Q1 Hi,
I have to use this part TL2575HV-05QKTTRQ1 in circuit. But before finalize this part we need confirmation on it's grade, whether it is automotive grade or not?
There is no information mentioned in it's datasheet. But…
Part Number: TL2575HV-33 Other Parts Discussed in Thread: LMR33610 , LMR36015 Hi Team,
I need to use a DC/DC Buck Convert with follwing specifications:
Vin: 10.5V-36V
Vout:3.3V
Iout:700mA
As classic DC / DC i would use TL2575HV.
I would Know if you can…
Part Number: LM22679-Q1 Dear SIr/ Madam,
Can i get any reference circuit to generate 33 Volts from the output of the IC, provided the given supply will be 28 Volts to the IC.
Best Regards
Rohith
Part Number: TL2575HV-05-Q1 Hi dears
I was looking for a switching voltage regulator with low switching frequency. So I found the TL2575HV-05QKTTRQ1 on mouser website.
When I try to found some layout guidelines on the datasheet. I realized it is missing…
Part Number: TL2575HV-05-Q1 We're using the TL2575HV-05-Q1 to drop a 48V input to 5V to feed some LEDs, and then an LDO to 3.3V which feeds a PIC with PWM. Total current draw at the 5V load is less than 1A.
Schematic:
C3 = EEV-FK1K101Q , 80V rating …
Part Number: DS90UB962-Q1 Tool/software: Hello TI,
We are using ti962 to connect 4 camera(ser is ti933) . We would like to find out register for spread but nothing find except for this:
As an option for mitigating EMI / EMC, the DS90UB962-Q1 is capable…
Part Number: TL2575HV-05-Q1 The datasheet for the TL2575HV-05Q1 says that the ON/OFF pin can be safely tied to Vin, but then specifies TTL/CMOS as its input. There is no maximum voltage called out in the absolute maximum ratings section. If we want to…
Part Number: TPS62441-Q1 Tool/software: If I were to set the switching frequency at 4 MHz and have the compensation set for smallest output capacitance with SSC enabled, I calculated Rcf using Equation 2 as seen in the image below:
The Rcf result is…
Hi Ethan,
Yes, I think 470 ohm should be more than enough, perhaps even more than is needed. I would refer you to the TIC12400-Q1 and TIC10024-Q1 ISO-10605 ESD Test Report ( Link ) for more information about the RC Filter components and what levels of ESD…
