Part Number: TL497A Other Parts Discussed in Thread: LM5157 , LM5155 Hi Team,
A customer is looking for a non-isolated converter to boost a +12V source to +18V and -18V at the same time. The max output current is 500mA.
I find the TL497A is possible…
Part Number: TL497A Other Parts Discussed in Thread: TPS55340 Hi,
we are looking for 5V input +/-10V output 500mA solution. Any suggestion? thanks!
PY Tsai
Other Parts Discussed in Thread: TL497A I am trying to generate -0.5V (0.1A) using TL497A. Is this possible with this regulator? because the calculations give me a negative R1 resistance value. Please suggest alternatives if not possible
Other Parts Discussed in Thread: TL497A , MC34063A Hi,
I have a TL497A set up to convert +5V to -19.5V. The problem I am running into is that the output voltage drops to -14V or so when the load is greater than a few mA. I need to be able to supply…
Anton,
Dating back to August 1991, I only found TL497A. Normally the suffix refers to the accuracy of the internal reference. I could not find any internal or external data for TL497 (without "A")
Other Parts Discussed in Thread: TL497A Hello all,
My design requires a minimum of 1.5 A current, I want to be able to boost my 9V lithium ion battery to about 18 Volts output voltage and get a minimum of 1.5 A output current from the TL497A chip. I…
Other Parts Discussed in Thread: TL497A Can you please tell me if the first equation on page 6 of the TL497A datasheet should have an argument for the I(pk)? Pages 5 and 7 have these arguments, but I wasn't sure if there was supposed to be one on page…
Other Parts Discussed in Thread: TL497A Hi: I'm using the TL497A and would like to use the same type of part (COT), but at a higher operating frequency, as to reduce the component size. Low ripple is a must. I need a part to convert +15 vdc to -15vdc…
