Part Number: TLC5926-Q1 Other Parts Discussed in Thread: TLC5926 Hello,
I have a few questions about the TLC5926-Q1
Is it possible to dimm the light with the TLC OE input ? I fear that a pwm clok can accidently put the TLC into the mode „switching…
Part Number: TLC5926-Q1 Tool/software: In the datasheet of TLC5926-Q1 chapter 10.1.2 (Adjusting Output Current) is a calculation for the Output-Current (5). e.g. 26 mA at 720 Ohm. In Figure 16 the output current at 720 Ohm is approximately 40 mA. What…
Part Number: TLC5926-Q1 Tool/software: The datasheet defines RθJC(bot) thermal resistance, does this indicate junction-to-thermal pad thermal resistance?
Part Number: TLC5926-Q1 Other Parts Discussed in Thread: TLC5926 , TLC6C5716-Q1 Tool/software: Hi team,
My customer use PWM input on OE pin and they have troubled when PWM input is 100%(always High).
In that case, IC surface temperature rises by about…
Part Number: TLC5927-Q1 Other Parts Discussed in Thread: TLC5926 Team,
is a firmware written for TLC5926(-Q1) going to be compatible with TLS5927-Q1. I guess it boils down to : does the addition short to vled detection capability adds 1 bit per channel…
Part Number: TLC5926-Q1 Other Parts Discussed in Thread: TLC5926 I am trying to control the TLC5926 with SPI from a raspberry pi. It is for a mockup where we are trying to demonstrate custom animations but am unable to find the series data structure,…
Part Number: TLC5926-Q1 Hi Team,
Good day, just want to confirm if the deviceTLC592x-Q1 and TPS92610 comes under Linear REGULATOR TOPOLOGY.
Thank you and looking forward for your kind response.
Regards,
Maynard.
Part Number: TLC5926-Q1 Hi expert,
TLC5926-Q1 is suitable on customer's new project. Is this the hero device? Do we have new device that i can suggest customer to use?
Here are the customer's requirement:
1. >=13 channel;
2. Drive current: >58mA…
Part Number: TLC5927-Q1 Other Parts Discussed in Thread: TLC5926-Q1 Can the TLC5926-Q1/TLC5926-Q1 outputs be wired in parallel to increase the current per LED string?
Part Number: TLC5926-Q1 Tool/software: Code Composer Studio Do anybody have an idea how to make Mode Switching by using SPI peripheral unit for TLC5926-Q1?
