Part Number: TLC6C598-Q1 Hello,
I hope all is well.
We are currently using the TLC6C598-Q1 Power Logic 8-bit Shift Register LED Driver in a automotive design. We reviewed the datasheet and would like to know/confirm the max ESD value for the TLC6C598…
Part Number: TLC6C598-Q1 Tool/software: As per datasheet, each channel of TLC6C598-Q1 can draw max 50mA current.
Is it necessary to put Current limiting resistor in series of LED?
Power source to LED is 5V.
with absence of LED series resistor, is…
Part Number: TLC6C598-Q1
Tool/software:
Hi, Support Team
we saw the datasheet of TLC6C598-Q1 the Battery is 9V to 40V,
if we change to under 5V could workable?
if any suggestion, Please advise me.
Thanks,
Best regards,
Lawrence
Part Number: TLC6C598-Q1 Other Parts Discussed in Thread: TLC6C598 Hello Experts, i would like to know how many devices can be cascaded connection. Do you have criteria to determine how many devices can be cascaded? Best Regards, Fujiwara
Part Number: TLC6C598-Q1 Other Parts Discussed in Thread: TLC6C598 For TLC6C598/12-Q1 LED drivers, what is the quickest pulse we can input into the G pin? My customer wants to know the maximum PWM frequency and minimum duty cycle it can support based…
Part Number: TLC6C598-Q1 Other Parts Discussed in Thread: TLC6C598 Hello guys,
One of my customers is going to start a mass production of their new products which use TLC6C598QPWRQ1.
But it is difficult to be delivered the device by their dead line…
Part Number: TLC6C598-Q1 Other Parts Discussed in Thread: TLC6C5912-Q1 Hi team,
Could TLC6C598-Q1 use with TLC6C5912-Q1 by the same shift register daisy chain for 20ch LED driving? For example, "Figure 14. Typical Application Circuit" uses two TLC6C598…
Part Number: TLC6C598-Q1 Other Parts Discussed in Thread: TLC6C598 Dear all.
Please review the circuit diagram of TLC6C598.
Three casades are connected as shown below.
In the second circuit, Pin no. 7&8 is connected by a 10 kohm resistance. Is…
Part Number: TLC6C598-Q1 Hello, Team,
The customer would like to know whether it is possible to input VCC + 0.1V to other signal lane pins.
Thanks and Best Regards, Masaru
