Because of the Thanksgiving holiday in the U.S., TI E2E™ design support forum responses may be delayed from November 25 through December 2. Thank you for your patience.



Search tips
Showing 14 results View by: Thread Post Sort by

  • TLC7226: DAC is not working when connected to more than 5 loads

    Part Number: TLC7226 Hello Team, We are using TLC7226 for one of our DAC application. We are using this DAC to control some loads which works on 0-10 volts analog voltage. We are able to control 5 devices in one channel with each DAC, but when connected…

  • TLC7226: Analog Voltage not set as per requirement

    TI Thinks Resolved
    Part Number: TLC7226 Other Parts Discussed in Thread: OPA192 , LM358 Hello Team, We are using TLC7226 for one of our DAC application. Data line controls through STM32 I/O. But even when we changed GPIO to maximum , at certain point ( Decimal Values set…
    • Answered

  • TLC7226: Specs clarification

    Resolved
    Part Number: TLC7226 Hi What is the HIGH and LOW Voltage levels for Control signals A0,A1,WR? In recommended operating conditions table,Vih=2V min and Vil=0.8V max .Does it condition apply for DB0-DB7 as well as A0,A1,WR? Regards, Deebanmadhu
    • Resolved
    • Answered

  • TLC7226: Thermal resistance and maximum junction temperature

    Resolved
    Part Number: TLC7226 May I know what is the junction to board/case/ambient thermal resistance, and the maximum junction temperature for TLC7226IDW?
    • Resolved

  • TLC7226: DAC IC is failing

    Part Number: TLC7226 Hi, Presently using TLC 7226CN DAC IC. I want to know in DAC chip AGND & DGND must be separate in layout? What if both are shorted. This IC is frequently failing after 4-5 days of operation,no heating found,operated under recommended…

  • TLC7226: The four ouputs change from operating voltage to 0V without any control.

    TI Thinks Resolved
    Part Number: TLC7226 The TLC7226C outputs connect to max301 directly. Sometimes the four outputs change from operating voltage to 0V . I can confirm that Mcu do not control it. What happened will the output reset to 0V?

  • TLC7226: Is it possible to cascade several TLC7226 for higher voltage output?

    TI Thinks Resolved
    Part Number: TLC7226 Other Parts Discussed in Thread: DAC8728 , DAC7728 I try to simulate different accumulator voltage level. The system I try to test has 3 accumulators connected in series but controlled separately (each has a nominal voltage of 12V…
    • Answered

  • TLC7226: TLC7226 voltage output error

    Resolved
    Part Number: TLC7226 Other Parts Discussed in Thread: LM431 Hi, I am trying to use a TLC7226 DAC for generating a precise 0-10V reference that can be controlled through a microprocessor. These are the settings of the DAC: Vdd: 15V. (Wall adapter with…
    • Resolved
    • Answered

  • TLC7226 data sheet?

    Resolved
    Other Parts Discussed in Thread: TLC7226 Hello, I would like to make a ramping voltage from approximately 0.3VDC up to approximately 1.0VDC. To accomplish this I decided to try out the TLC7226C from TI. I was able to get this chip to ramp from 0 volts to…
    • Resolved
    • Answered

  • TLC7226 ... not enough resolution!!!

    Resolved
    Other Parts Discussed in Thread: TLC7226 , DAC7625 , DAC7724 Hello, I was wondering if TI has a quad DAC exactly like the TLC7226 (PDIP) but with a higher resolution for example 10 bit instead of 8? Here are some specs: 1) output dac voltage: 2 to 3.3 V…
    • Resolved

Didn't find what you are looking for? Post a new question.