Part Number: TLC7528 Hi,
Can I use the TLC7528 with VDD=3.3 V? I couldn't judge from the data sheet, so it would be helpful if you could tell me.
If not, could you tell me which device has the same specs as the AD5428 that can operate at VDD=3.3 V…
Part Number: TLC7528 Other Parts Discussed in Thread: DAC43204 Hi Team,
Do we have alternatives to replace MAXIM DAC DS4422N+T&R in current situation?
BR,
Oliver Tang
Vijay,
This device is a multiplying DAC which is essentially only an R-2R ladder without an internal output buffer. Therefore, there is no offset error associated with the device.
Part Number: TLC7528 Other Parts Discussed in Thread: DAC8811 In a circuit such as Figure 9. of the TLC7528 datasheet, excluding effects of the circuit external to the DAC, for DAC selection, how can figure out the frequency limitations of a circuit like…
Part Number: TLC7528 Hi
My customer use TLC7528, the schematic attached as below.
Change the DB0-DB7, the OUTB voltage was different with theoretical value.
When increase the input voltage the output voltage decrease.
Waiting for your reply…
Part Number: TLC7528 Hi team,
Customers want to use TLC7528 chip to generate modulation wave: the reference voltage is ±2V, duty cycle 50% square wave, square wave frequency is a fixed frequency between 2-12KHZ; the output is bipolar wave with variable…
This is an old thread, but I'm going to jump in here anyway because I just ran into exactly the same problem that the OP asks about. As near as I can figure out by trial and error, no thanks to the data sheet, the TLC7528 works in "voltage-mode" ONLY…
Other Parts Discussed in Thread: TLC7528 , DAC8822 Hi, I would like to build Digitally-Controlled State-Variable Filter. See on page 13 in http://www.ti.com/lit/ds/symlink/tlc7528.pdf. The problem is that data converter TLC7528 does not operate as shown…
Other Parts Discussed in Thread: TLC7528 , OPA627 I am using both DACs in a TLC7528 and I am not seeing the same output characteristics on both DACs. I am updating DACA and DACB 250 nanoseconds apart at a 1Khz rate. My test case is setting both DACs from…
Part Number: DAC0800 Other Parts Discussed in Thread: TLC7528 , DAC081S101 Tool/software: I used DAC0832 for the design before, as shown in the picture. Because EOL requires substitute materials, I need to do compatibility design on one board. I looked…
