Part Number: TLK105 Other Parts Discussed in Thread: DP83825 Hi Team,
Do we have RMII mode hardware reference design based on TLK105RHBR here? Customer is consulting about it.
BTW, I notice TLK105RHBR is nor recommended to new design. If you have another…
Part Number: DP83822I Other Parts Discussed in Thread: TLK105L , TLK105 Hi, I have a problem with my new DP83822,
The TLK105 pins PFBOUT/PFBIN1 and PFBIN2 should be all short-circuited as in the schematics of IDKAM437x. However our pcb design was poorly made…
Part Number: DP83822I Other Parts Discussed in Thread: TLK105 Hi,
DP83822 has a longer linkup time than TLK105's as a related thread.
Does DP83822 have a weaker point else compared with TLK105?
Best Regards,
Kuramochi
Part Number: TLK105 Other Parts Discussed in Thread: LM25145 Hi team,
When a high power LM25145 DC-DC works beyond 20W, the Ethernet communication is interrupted. When supplying this 20W with an external LM25145 board, the Ethernet communication is fine…
Part Number: TLK105 Other Parts Discussed in Thread: DP83822IF Hello, I use the ethernet PHY TLK105 in many designs. But now the PHY is NRND. " Replaced By DP83822I – The device has the SAME FUNCTIONALITY and PINOUT as the compared device but is NOT an…
Part Number: TLK105 Other Parts Discussed in Thread: DP83822I Hi,
we have reproducable problems with the startup of an EtherCAT slave with TLK105, correlating with the ambient temperature. Now we did a quick test with DP83822I as a 1:1 replacement and…
Part Number: TLK105 Hi, I have been facing a strange problems. From time to time after power-up TLK105 used in my client's products is behaving like a dead one. There are no clocks generated on TX_CLK and RX_CLK lines what causes MAC layer of uC (STM32F427…