• 

  ilmars labrencis

  • over 1 year ago
  • Power management
  • Power management forum

  RE: LM1084: Using D/A output to set the regulator output voltage

  Hi Ryan, I tried the suggested solution but doesn't work with the LM1084. The op amp that I'm using is the TLV2371 to buffer the DAC output. The Vnom value is 7.5V with a Vmarg of 3V the DAC output is 0 to5V and I selected 2.5V as the Vdacn...
• 

  Mihir Gupta65

  • over 3 years ago
  • Amplifiers
  • Amplifiers forum

  RE: TLV2371 - Op Amp - Input Voltage and Input Current Limitations - ESD Diodes?

  Hi Jeff, I recently answered a similar question about overvoltage conditions at the input of an opamp: e2e.ti.com/.../530650 As long as the current through the ESD diodes is limited to 10mA, there should be no damage to the opamp. Keep in mind...
• 

  Macjan Camilo Fernandes

  • over 3 years ago
  • Amplifiers
  • Amplifiers forum

  RE: TL031CD is misbehaving in voltage follower mode. Any suggestions on schematic design? Is this related to single supply?

  Thomas, Thank you for the valuable information. I'm going forward with TLV2371. Regards, Macjan.
• 

  Paul Goedeke

  • over 2 years ago
  • Amplifiers
  • Amplifiers forum

  RE: TLC2262: What is the closest SINGLE op amp match to the TLC2262/4?

  Hi Brian, Thomas gave you a good suggestion, I'll add another - the TLV2371 is worth a look as well. A little higher offset voltage but similar specs otherwise. -Paul
• 

  Hirotaka Matsumoto

  • over 5 years ago
  • Amplifiers
  • Amplifiers forum

  TLV2371 - the phase margin and the gain margin

  • Resolved

  Hi all Would you mind if we ask TLV2371 ? We measured the phase margin and the gain margin using
• 

  Jake Jung

  • over 3 years ago
  • Amplifiers
  • Amplifiers forum

  TLV2371-Q1: TLV2371-Q1 No Output Issue

  • Resolved

  Part Number: TLV2371 -Q1 Hi. Some TLV2371 -Q1's output is not good. So I measured between positive
• 

  Thomas Kuehl

  • over 6 years ago
  • Amplifiers
  • Amplifiers forum

  RE: TLV2371 output impedance

  Hi Jake, It looks like open-loop (Zo), or closed-loop output impedance, was not included in the TLV2371 data sheet. It is a common practice for us to include the open-loop vs. frequency for our newer precision operational amplifier products, but wasn't...

  • TLV2371_Z0_vs_freq.png
  • View
  • Hide
• 

  domenyko

  • over 3 years ago
  • Automotive (Read-Only)
  • Automotive Forum (Read-Only)

  TLV2371-Q1 in GND fault condition

  • Resolved

  to the Rail) such as the TLV2371 -Q1 What about the ability of the device to sustain overvoltage and to source
• 

  Thomas Kuehl

  • over 4 years ago
  • Amplifiers
  • Amplifiers forum

  RE: TLC271 vs TLV271

  Hi Henry, The TLV271 is a newer operational amplifier quite similar in performance to the TLC271, but produced on a more modern CMOS process. It can be used with a lower minimum supply of 2.7 V over the temperature range of -40 C to +125 C (grade dependent...
• 

  Thomas Kuehl

  • over 5 years ago
  • Amplifiers
  • Amplifiers forum

  RE: regarding EMI fail in Circuit using TLV2734

  Hello Hy, I believe you have transposed the model number in the title and really intended the TLV2374, as the PowerPoint schematic shows. So my discussion is with regard to this product. Many of TI's Precision Analog operational amplifier products...

Didn't find what you are looking for? Post a new question.

• Ask a new question