Search tips
Showing 37 results View by: Thread Post Sort by

  • SN74LVC1G14-Q1: Clipped sine wave into Square wave

    TI Thinks Resolved
    Part Number: SN74LVC1G14-Q1 Other Parts Discussed in Thread: TLV3501A-Q1 , DS90LT012AQ-Q1 , TLV3201-Q1 , TLV3201 I am using the oscillator of 10MHz with 500ppb,0.8Vpp Clipped sine wave output. I need to convert that Clipped sine wave into 3.3V Square…
    • Answered

  • RE: LMT87-Q1: VOUT behavior when VDD=3V and temperature is -150C to 20C

    Resolved
    Hello Kelvin-san, Thank you for your answer. I’m suggesting LMT87-Q1 and TLV3201-Q1 to perform temperature switch with large hysteresis (100C ON and 30C OFF) to customer. So I wanted to confirm that LMT87-Q1 output doesn’t behave like green…
    • Answered

  • TLV3202-Q1: Bidirectional Current Sense Simulation Problem with TLV3202AIDGKR

    Resolved
    Part Number: TLV3202-Q1 Other Parts Discussed in Thread: TLV3201 Hi, I am using TLV3202AIDGKR comparator for my 48 V three phase BLDC motor drive project. I am aiming to use this comparator as an overcurrent protection for phase B, C and DC currents.…
    • Resolved

  • TPS22965-Q1: The Spice model does not work with LT spice tool

    TI Thinks Resolved
    Part Number: TPS22965-Q1 Other Parts Discussed in Thread: TLV3201 , TPS22965 , PSPICE-FOR-TI I download the spice model from website, but when I doing simulation, it shows error like below, may I know what I need to do? Circuit: ****PWMOut_Sim_Type3_TLV3201_TPS22965…
    • Answered

  • SN74LXC1T14-Q1: Need to Have 5V Square Wave from 0.8Vpp Clipped Sine Wave TCXO Source

    Resolved
    Part Number: SN74LXC1T14-Q1 Other Parts Discussed in Thread: TLV3201 , LMV7219 , TLV3501 I need an accurate 16MHz 5V square wave clock source as a frequency reference. Right now I'm currently looking at SN74LXC1T14-Q1 to translate the TCXO output from…
    • Resolved
    • Answered

  • low side uni-directional OC detection

    Resolved
    Part Number: TLV9002-Q1 Other Parts Discussed in Thread: TLV3231 , TLV3201 , TLV9031 Tool/software: Hi, My customer is designing a 48V auto BMS system. orignial, they are evaluting TPS4800 + INA solution to meet bi-directional low side OC detection…
    • Resolved

  • OPA388-Q1: Simulation - High speed over current detection

    Part Number: OPA388-Q1 Other Parts Discussed in Thread: OPA388 , TLV3201 Hello GPAMPs team, my customer is interested in simulatie the High speed over current detection concept based on the application note https://www.ti.com/lit/an/snoa987a/snoa987a…
    • Answered

  • TIDA-00176: question of TIDA-00176

    Resolved
    Part Number: TIDA-00176 Other Parts Discussed in Thread: TLV3201 Dear sir, would you please help on the two questions from customer? Q1: In chapter 1.3.1.6, the calculation of angle resolution cannot match the figure value. For example, if line count…
    • Resolved

  • RE: TPS3701: Propagation Delay while detecting an Under or Over Voltage

    Hi, Please keep me posted about the TPS3701 datasheet error issue. I want to use it for creating a over current trip signal for a current sense signal from a hall sensor. Thus, propagation delay must be kept to a minimum. It would be great if you could…

  • INA300: Alternative Solution for Type-C 48V Application

    TI Thinks Resolved
    Part Number: INA300 Other Parts Discussed in Thread: INA200-Q1 , INA200 , , INA293 , TLV3201 Dear Team, Due to PD 3.1 will support EPR (up to 48V voltage), my customer requires a solution to replace previous INA300A. Could you help to recommend…

Didn't find what you are looking for? Post a new question.