Part Number: TLV320ADC3101-Q1 Hi Team,
I looked in the datasheet, but was not able to find the I2C rise and fall time specifications listed. Would it be possible to obtain the specifications so that I can make sure the I2C master is producing the appropriate…
Part Number: TLV320ADC3101-Q1
Hi team,
As the thermal performance becoming increasingly demanding on the vehicle, one of my customers decided to do thermal simulation validation.
Could you help provide the thermal model of TLV320ADC3101-Q1? Auto the…
Other Parts Discussed in Thread: TLV320ADC3101-Q1 Hi,
Iam using TLV320ADC3101-Q1 in one of my design. In the d/s it is said that internal ADC clock can be derived from either MCLK or BCLK.
My board has only BCLK. So can I leave MCLK open.
Thanks
Naigin…
Other Parts Discussed in Thread: TLV320ADC3101-Q1 , TLV320AIC3254 , TLV320ADC3101 , TLV320AIC3254-Q1 We are considering the use of the TLV320ADC3101-Q1 for an automotive application. We need to implement a needle filter centered at 1 KHz (and possibly also…
Other Parts Discussed in Thread: TLV320ADC3101-Q1 Hi,
I am using TLV320ADC3101-Q1 Audio ADC in I2S TDM mode.
It's MCLK (master clock) is 12.288 MHz and I need to know what is the maximum possible BCLK (bit clock) I can provide to the ADC to acquire data…
Other Parts Discussed in Thread: TLV320ADC3101-Q1 We have a mixer design that use tlv320adc3101-q1 chip. The microphones are connected to a pream chip and then the pream is connected to the ADC. One for a while, we could not hear any microphone input.…
Hi,
playing the file 44100Khz file with addied those changes.
Now the measurement of clock
1. MCLK = 24mhz (Can you please tell the codec will support external clock upto 24mhz)
2. BCLK = 1.5mhz
3. Frame clock = 46.9khz
This will come 44100khz right…
Hi Scott,
To answer your second question, yes you can set the device up to run without a full I2S bus: just an MCLK. I've attached a PLL Calculator tool, with the settings saved for what I think is right for you. This gives a sample rate of 44.1k with…
Part Number: SRC4190-Q1 Other Parts Discussed in Thread: CC2560 , TLV320ADC3101 , SRC4190 Hello, Team,
My customer is inputting signal from TLV320ADC3101 to CC2560 with "DSP mode" stated in the datasheet of TLV320ADC3101.
Is it possible to input…
Hi Zak.
Thanks for your reply. my intended MCLK and BCLK is equal to 3.072MHz and channels should be 2, So seems like I have to raise my clock frequency to solve it?
Another question, is TLV320ADC3101-Q1 the same requirement as TLV320ADC3101?
BRs.
W…
