Part Number: TLV320ADC3101EVM-K We have the TLC320ADC3101-K EVM and looking to get started on development. There's mention of a Control Software but it doesn't come up in any search on the TI website. Where is the software tool download for this…
Part Number: TLV320ADC3101EVM-K
HI,
We are using TLV320ADC3101EVM-K and performing parameter measurement over frequency and we see below observation. The results looks fine as per datasheet at 1KHz but the parameters degrade as frequency goes above…
Part Number: TLV320ADC3101EVM-K Hi,
We are using TLV320ADC3101EVM-K in our solution. Please find below questions on same:
1) What is the maximum input impedance that can be interfaced to single ended input of ADC. as we would like to connect a low pass…
Part Number: TLV320ADC3101EVM-K HI,
We are using TLV320ADC3101EVM-K in one of our projects, we are trying to configure PCM and TDM modes from the TI GUI but unlike other protocols we don't find an option to configure PCM/TDM protocols. Could you please…
Part Number: TLV320ADC3101EVM-K Hi,
We are using TLV320ADC3101EVM-K, in our application.
As a initial testing, we have given 1V P-P as input to Analog input of Eval board (i.e. J6) and removed the W4 jumper. And we have connected the I2S output from J5…
Part Number: TLV320ADC3101EVM-K I have connected a TLV320ADC3101EVM-K via USB to a PC and it is not being detected by the ADC3101 CS software. Here's a screenshot:
In Device Manager, the eval board shows up like this:
I have installed and re-installed…
Part Number: TLV320ADC3101EVM-K Hello I just bought your kit but I can't use it. I am on windows 11 pro.
I installed the software, I changed the compatibility to windows 7 and when I run it as administrator it works but my card is not connected. However…
Part Number: TLV320ADC3101EVM-K Hi Team,
I have applied the ADC3101EVM and found that we don't provide the USB cable. Where can I apply the USB cable? The USB cable is the type B after checking the user guide. Can you show how to connect the EVM and PC…
Part Number: TLV320ADC3101EVM-K
Hi Guys,
I am getting the following message when I am running ADC3101 Control Software (CS).
I've installed the latest LabView runtime engine and still the SW does not start.
Please HELP
Part Number: TLV320ADC3101EVM-K
Hello ,
I tried the steps in the word file and still I was unable to fix the problem. Getting error Download command failed.
When I m connecting the EVM USB,
W11 disconnected
J6 1 and 3 connected
SW2 = A2 and external…
