Part Number: TLV320ADC3120 Hi Team,
Need provide TLV320ADC3120 register configurations table.
TLV320ADC3120 needs to be configured as the output of I2S SLAVE 2 channel 16bit 8KHz sample rate.
Part Number: TLV320ADC3120 Hi Team,
Please confirm the register table and circuit.
1) There is loud background noise. 2) There is "POP noise" when recording is turned on (I2S signal turn off and turn on), If I2S signal always turn on, there will be no…
Part Number: TLV320ADC3120 Other Parts Discussed in Thread: TLV320ADC6120 Hello,
My customer is looking for a replacement for the ES7243L.
The required specifications are as follows.
- Bit/depth: 24bit / 96Khz or Adove - VDD: 1.8v or 3.3v - VDDIO: 1.8v -…
Part Number: TLV320ADC3120
Hi,
for a project I want to utilize the TLV320ADC3120 ADC for Audio-like signals.
My signals are DC coupled, 0-800mV Sine, 5kHz.
For some reason the adc, once configured is pulling my signal up to 1.5V on its inputs, even if…
Part Number: TLV320ADC3120 Hi expert,
Following the thread LMV1012: Questions , customer prefer to have PDM data stream like FAN3852 so having minimum effort of changing FW. Does TLV320ADC3120 support PDM or could you please advise any others?
Regards…
We have solve the problem. We use a "dc offset correction register" in the DC-Mode. In our case the CPU wrote after ther start up sequence a 0.1 factor in this "dc offset correction register".
Part Number: TLV320ADC3120 Hi team,
My customer would like to make the group delay longer. Are there any ways to do it without changing biquad filter parameters and digital dicimation filter parameters?
Best regards,
Shunsuke Yamamoto
Part Number: TLV320ADC3120 Hi Experts,
Seeking your assistance on this request from Cx:
TLV320ADC3120 power supply 1.8V, set to single-ended input mode, 10 kΩ input impedance, HPF setting 0.00025fs, input 2.5v peak-to-peak, 1.25v bias sine wave signal…
Part Number: TLV320ADC3120 Other Parts Discussed in Thread: PCM1821 , PCM1820 , TLV320ADC5120 , TLV320ADC6120 Hi experts,
My customer is interested in PCM1821 or PCM1820 for his headphone system because it is controlled by pin control. But he is also interested…
Thanks. Sanjay,
I setting 0x0c to 0x20 and it's work.
Here is my result.
TLV320ADC3120 sending stereo data on digital scope.
analog scope channel 1,2 is TLV320ADC3120 ADC input.
analog scope channel 3,4 is TLV320ADC3120 I2S output passthrough to …