Part Number: TLV320AIC1106
Hi team,
Are there any power supply sequences? Which power supply should the customer turns on first? EARVDD or DVDD?
It is helpful for the customer to include the clock sequence such as PCMSYNC, MCLK, MICMUTE and EARMUTE. …
Part Number: TLV320AIC1106 Hello,
TLV320AIC1106's data sheet defines only the Typ value of MCLK frequency, but how much frequency tolerance is allowed? I've never seen a clock that has no frequency error at all. The frequency error I've ever seen ranges…
Part Number: TLV320AIC1106 Other Parts Discussed in Thread: TLV320AIC1107 , TLV320AIC1103 About datasheet of TLV320AIC1106 and TLV320AIC1107, dissipation rating are very high spec.
Is below specification typo?
Please let me know about correct spec for…
Part Number: TLV320AIC1106 Hello,
There are several power pins and GND pins as shown below. Should it be connected in common as an analog power supply and an analog GND? Or should it be separated into analog power supply, digital power supply, analog GND…
Part Number: TLV320AIC1106 Hello,
I'd like to know about the Max peak-to-peak output voltage of TLV320AIC1106's EAROUT+/- when the outputs have no load.
V DD = 3.3 V
µ-law mode
No load
Best regards, Shinichi Yokota
Part Number: TLV320AIC1106 Hello,
I have three questions. question 1 The parameter in the "transmit gain and dynamic range, companded mode (μ-law) or linear mode selected" table in the data sheet states Overload-signal level (3dBm0). On the…
Part Number: TLV320AIC1106 Hello,
How should I deal with unused microphone input pins of TLV320AIC1106 (MICIN+/- and MICGAIN+/-)?
Best regards, Shinichi Yokota
Part Number: TLV320AIC1106 For the differential input stage 1, what is the minimal value of R2 (see page 11 of spec)?
The datasheet gives the range of 34−100 kΩ.
This implies that the minimum value is 34 ohms or it is 34K ohms
Part Number: TLV320AIC1106 Hello,
A noise is seen at TLV320AIC1106's PCM output in the µ-Law mode when no signal is at its microphone input. I'd like to know how to fix this issue. The code 0xFF is expected but sometimes such codes as 0xDC or 0xDB are…
Part Number: TLV320AIC1106 Hi there,
I would like to use the TLV320AIC1106 in combination with a 4 pole TRRS Jack, so I need to change the differential input of the microphone to a single ended one and also the audio output to single ended.
So the microphone…