Part Number: TLV320AIC24 Tool/software: I'm having some issues getting the analogue loopback working. I can configure the registers for the device, and see the signal applied at the input, but when i set the analogue loopback bit I see nothing at the…
Part Number: TLV320AIC24 Tool/software: We are have multiple designs that use TLV32CAIC24 codecs. We have to use the AIC24's, due to customers existing software support for this device. Using their application software, all designs appear to work fine…
Part Number: TLV320AIC24 We have developed a custom board. In that custom board we used tlv320aic23 sound chip. We have also interfaced the driver with the chip. But from customer end we have a requirement to have a PCM bar in alsamixer. But the tlv320aic23…
Part Number: TLV320AIC24 We are having to re-engineer an existing TLV320AIC24 design.
This design will power up with the TLV320AIC24 MCLK and RESET pins held low, until the boards software enables the MCLK circuitry (8MHz) and then enables RESET high…
Part Number: TLV320AIC24 Hi Team,
A customer would like to know the difference between TLV320AIC24I and TLV320AIC24KI. The datasheet shows that both devices have the same operating temperature of -40C to 85C and TQFP package.
Regards,
Danilo
Part Number: TLV320AIC24K Other Parts Discussed in Thread: TLV320AIC24 Hi TI,
What is the CHIP ID( Chip version ) for TLV320AIC24 audio codec?
Please let me know how to know the Chip ID.
Regards,
Deepeshwar
Other Parts Discussed in Thread: TLV320AIC24 The problem : TLV320AIC codec outputs no audio on the Audio Ports after power on initialization. this happens only on may be 300th to 400th power cycle
Part No:TLV320AIC24
DSP used to interface: TMS320VC5470…
Other Parts Discussed in Thread: TLV320AIC24 Does the TLV320AIC24 have the LCD DAC output available ?
The data sheet (april 2005) is inconsistent, it is shown on the block diagram & then omitted from the electrical parameters tables.
Other Parts Discussed in Thread: TLV320AIC24 , TLV320AIC24K Team,
I am the TI Rep here in KC, and I call on Honeywell in Olathe, KS. Here is a question from one of the engineers, and Luca said that I needed to submit this question on the forum. Please…
