Hi, Geoff,
You can always find the latest version of all our documents on www.ti.com, so yes, SLAS520D is the latest revision of the TLV320AIC3101 data sheet.
For your question about head set detection, we have an app note about that. You can find…
I haven't settled on a particular codec yet for the design, as I didn't want to rule out possible solutions. The dev board I have comes with the TLV320AIC3101.
Do you ask because it may be easier with a particular codec?
Thanks.
Other Parts Discussed in Thread: TLV320AIC3101 , TLV320ADC3101 Greetings,
I have a design with TLV320AIC3101. Everything works great but I notice some DC offset in the signal. Is there a way to reduce or eliminate this DC offset.
BR and Thanks in…
Dapkus-san,
Thank you for your prompt reply.
With regard to THD vs PO plot, would you please let me know the actual equation?
In addition to that, please let me know the CMR value of this device, since we are trying to input differential signal…
Thank you for the input. The TI Employee that sent me the link said it would work if I changed the frequency.
We want to build a 2400 MHz one way mono audio link with fixed channel setup. The Purepath CC8520 with the TLV320AIC3101 CODEC is a nice product…
Hi Nicolae,
See attached list for the differences.
3122.AIC-PCM products.pdf
The 2 devices have different voltages, hopefully the list will help.
Regards,
Peter
Tom,
If my translation is correct you are asking if the I2C address of the AIC3101 device is 0x18. If this is what you are asking, the answer is: yes. The data sheet (http://www.ti.com/lit/gpn/tlv320aic3101) says:
Scott
Other Parts Discussed in Thread: CC8520 , TLV320AIC3101 Hello,
My application is CC8520 + TLV320AIC3101 + Microcontroller (uP), powered from LiIon 1-Cell.
CC850 requires AVDD, DVDD and IOVDD,
Preliminary I use for AVDD and DVDD one 3.0vLDO and…
Other Parts Discussed in Thread: CC8520 , TLV320AIC3101 Hi,
I want to have the received digital audio mixed with local inputs on my implementation of the CC8520 / TLV320AIC3101 wireless receiver built to essentially the same schematic as the TI Demo…
Hi Yuki,
I have attached here our CODEC products for you to peruse, you can click the part number to go to the product folder.
Take a look which will suit your customer requirements, these are currently active devices.
Let me know if you have other…
