Part Number: TLV320AIC3104 Hello, When I input the sine wave of 100mVrms signal from LINE1LP for audio recording, when I execute the command arecord -d 10 -f cd -r 48000 -t wav 001.wav after recording the audio, there is a large clutter in the audio played…
I appreciate for your support.
I think that it's difficult for us to resolve this anymore.
So I'd like to close this ticket.
If I have a relevant issue on TI device, I'll open new ticket.
Many thanks
Part Number: TLV320AIC3104 Hello,
I have a Raspberry Pi compute module based project under work, where I intend to use the TLV320AIC3104 I2S CODEC for audio playback and microphone input. I am designing a board with the CODEC on it and later I need to…
Part Number: TLV320AIC3104
Hi Team,
Q1:
Can 3104codec use different frequencies to play(ADC) and record(DAC) at the same time? For example: Use 8000HZ to play audio, and use 48000HZ to capture audio at the same time. Q2: If I configure the ADC with 48000HZ…
Part Number: TLV320AIC3104 Dear Sir
I'm using tlv320aic3104 to implement audio path in our product.
I'd like to clarify the amp/pga in the block diagram below.
We are using two path in this block area.
A path is to record voice.
B path is one…
Part Number: TLV320AIC3104 Hi, thank you for your several replies so that I can realize the setting of this channel. I noticed this when I set up the following path. R1 128 R7 128 R19 0 R15 0 R51 5 R37 2 R46 128 R51 13 After I set the register path, I used the…
I finally found the answer to my question, it seems that there is an issue on iMX7D SoC as mentioned on this document https://www.nxp.com/docs/en/errata/IMX7DS_3N09P.pdf page 14.
ERR011096: SAI: Internal bit clock is not generated when RCR2[BCI]=1 or TCR2…
Part Number: TLV320AIC3104
Hello TI team,
How to match the codec SPK output to the input of the MIC at the codec layer, my customer needs to do a loopback test.
Do you have any configuration Profiles and how to do this test?
Thanks !
Part Number: TLV320AIC3104
Hi Team,
I am now testing the recording function. After recording, I used Audacity software to view the audio signal and found that the signal moved upward as a whole on the y-axis. What could be the cause?
I think under…