Part Number: TLV320AIC3106 Tool/software: Hello, I have a few questions about bass and treble adjustment,
If I first set the bass to 100Hz(Fc), the amplitude gain is 1 dB, and then set the treble to 10KHz(Fc), the amplitude gain is 1 dB.
1. Will the…
Part Number: TLV320AIC3106 Tool/software: since the 3106 codec driver doesn't have support for the DMIC or the page 1 filter parameters i need to be able to access registers directly. i was told in another post i can use "snd_soc_component_write" to…
Part Number: TLV320AIC3106 Tool/software: in the related thread i was provided altered driver files that gave DMIC support. unfortunately i wasn't able to test it for some time due to prototype woe's.
i am finally getting to test it and i am…
Part Number: TLV320AIC3106 Other Parts Discussed in Thread: AM4378 , Tool/software:
We are using the TLV320AIC3106 Codec in our design, the OS is TI Linux (Linaro tool chain, Arago package) on an AM4378 microprocessor and are trying to configure the specific…
Part Number: TLV320AIC3106 Tool/software: The 3106 datasheet says it has ESD protection up to 1.9kV (or 1.5kV depending on which ESD module you use for testing). I assume that applies to all pins on the device. If I wanted to add more ESD protection…
Part Number: TLV320AIC3106 We require that the 3106 be configured as the slave. The processor will be the master of the audio bus, in this case a Renesas RZ/G2L processor.
Section 10.3.3.1 of the 3106 datasheet implies that all internal clocking can be…
Part Number: TLV320AIC3106 Tool/software: hello.
I have posted an inquiry using the link below, but I would like to ask if there is anything that needs to be modified in the settings.
e2e.ti.com/.../5203902
As in the title, I want a part with MONO_LOUT…
Part Number: ESDS311 Other Parts Discussed in Thread: ESDS312 , STRIKE Tool/software: I started a discussion over in the Audio forum about ESD protection on the mic inputs. They suggested I try again over here. Is there any ESD device I can put on the…
Part Number: TLV320AIC3106 Other Parts Discussed in Thread: TS3A227E Hi
I am designing Audio circuit, and I plan to use TLV320AIC3106 as codec with TS3A227ERVAR as detection.
here are the few questions
1. It is supposed to get low level on MIC_Detection when…