Part Number: TLV320AIC3110 It is mentioned in section 7.3.11.1 of the datasheet, that lower power can be achieved by deriving clocks from simple dividers, and NOT using the PLL. I can't find anywhere, how much power that would be expected to save (i.e…
Part Number: TLV320AIC3110 Hi Team,
Our customer would like to know the minimum signal level required at the input of analog mic input port / at the input of the ADC (considering 0dB of pre-amp gain). He need to evaluate whether his microphone will…
Part Number: TLV320AIC3110 The datasheet and other posts imply that the AIC3110 detects headset insertion by looking at a 4th contact on the headphone jack socket. Is this the case or is there some cunning means to detect with just the L-R and GND wires…
Part Number: TLV320AIC3110 Other Parts Discussed in Thread: TLV320AIC3104 , TLV320AIC34 , TPA0253 Hi
We are looking for CODEC with 2 headphones drive + 1 MIC input
Do you have any such solution ?
HI Simon,
Thanks for sharing this information and I would be happy to help with any recommended configurations and sequences.
Creating a new post would be great!
Regards,
Aaron Estrada
Hi Steve,
Thanks for the response.
As suggested, we updated the hardware modifications, but still no sound output.
The current board is a miniature version of our original board, where we need 2 SPK out, thats why we sticked to TLV320AIC3110…
Part Number: TLV320AIC3110
I am trying to run TLV320AIC3110 on my board with STM32F7 on board In the debugger, I see that all the registers were successfully written to TLV320AIC3110 during initialization Data is visible on the oscilloscope, but TLV320AIC3110…
Part Number: TLV320AIC3110 Hello,
Is it mandatory to Provide MCLK to TLV320AIC3110 Audio Codec ?
As i have seen in Datasheet functional Block diagram of Codec there is note :
Normally, MCLK is PLL input; however, BCLK, GPIO1, etc., can also be PLL…
Part Number: TLV320AIC3110 Hello,
In one of our design we are using Audio Codec TLV320AIC3110 . We are playing Audio on Headphone only then what should be connection for rest of pins and what should be connection for Headphone .
We are using only…
