Part Number: TLV320AIC3110EVM-U Tool/software: Hi Sir, Actually I am trying to validate my I2S as a part of it I am tring to connect my cpu to audio codec and tring to play a sine wave and configure the codec in recording mode with I2C so that codec receives…
Part Number: TLV320AIC3110EVM-U Tool/software: Hi Sir, Actually I am trying to validate my I2S as a part of it I am tring to connect my cpu to audio codec and tring to play a sine wave and configure the codec in recording mode with I2C so that codec receives…
Part Number: TLV320AIC3110EVM-U Tool/software: Hi, I am developing a I2S driver for a SoC chip, and testing it against TLV320AIC3110EVM-U. When I set AIC3110 as a master, i.e., BCLK and WCLK set to output, I see some strange behavior. Whenever this SoC…
Part Number: TLV320AIC3110EVM-U
Hi team,
We are developing Audio module on IMX8MM board using TLV320AIC110 CODEC.
Currently I2C communication is working properly.
But when I connect MCLK, BCLK, WCLK from IMX8MM to TLV320AIC 110EVM, I'm getting…
Part Number: TLV320AIC3110EVM-U Other Parts Discussed in Thread: TLV320AIC3110 Hi Team,
I'm test TLV320AIC3110 EVM.
My circuit is as below, the input signal is 0.2Vpp 2kHz sine wave, and my config files as shows in the pic, there is no gain in the…
Part Number: TLV320AIC3110EVM-U I purchased the TLV320AIC3110 EVM and its working fine. I would like to hook up an external I2S interface to make sure it works well with my controller. I don't see any obvious way to hook up external BCLK, LRCK and DIN…
Hi Andy,
The tlv320AIC3110EVM-U was unfortunately not designed with an external i2S source in mind. If you have a aic3111evm that does have the external i2S inputs and is almost identical to the aic3110, but it has a programmable miniDSP.
Best regards…
Part Number: TLV320AIC3110EVM-U Now that I found out how to externally supply the I2S signal by disabling the I2S from the onboard chip, I find that the board isn't outputting my audio.
hooked up BCLK, WCLK and DIN
Left justified, 48000hz,16bit, 1…
Hi, Kay,
Unfortunately, we don't have the OrCAD source file for this EVM. I would recommend you to use the Gerber files available in the TLV320AIC3110EVM-U product folder as reference for the design.
Best Regards,
-Diego Meléndez López Audio Applications…
Part Number: TLV320AIC3110EVM-U Other Parts Discussed in Thread: TLV320AIC3110 , CC2564 Hello all!
Can I connect the TLV320AIC3110 digital audio interface to the CC2564MOD Bluetooth module digital audio interface?
The pins description is a bit confusing…
