Part Number: TLV320AIC33 Tool/software: Hi,TI ' s experts
Our audio products have been using the TLV320AIC33/TLV330AIC3106 audio codec chips on the AM335x platform for many years. Recently, during customer use, a small number of devices have occasionally…
Part Number: TLV320AIC33 Tool/software: I need a chip for PCM to I2S conversion that's in production and can be purchased in the next few weeks. So far I have not been able to find anything in this family of devices that fits my parameters besides the…
Part Number: TLV320AIC33 Other Parts Discussed in Thread: CC2564MODN , I'm working with the TLV320AIC33 codec and using I2S as the Audio Serial Data Interface. The codec is configured as the master, and on the other side, there's a CC2564modn Bluetooth…
Part Number: TLV320AIC3106 Other Parts Discussed in Thread: TLV320AIC33 ,
Hi,
We are looking to load the TLV320AIC33 codec on a board in place of the TLV320AIC3106 which we currently use.
The reduced functionality of the TLV320AIC33 looks like it…
Part Number: TLV320AIC33
Hai,
We are using TLV320AIC33IRGZR audio codec with IMX8 M PLUS PROCESSOR. In that audio codec, I have a few queries.
1. I am using audio input with two-lane (LANE2_LP & LANE2_RP) remaining LANE2_LM & LANE2_RM should be…
Part Number: TLV320AIC33
Hi Tis,
Please help check.
I have tried the AGC function on I2S record path and it works well.
But the AGC function have no effect on PGA bypass path. is it right?
Sorry! another question about the AGC max gain(Page…
Part Number: TLV320AIC33 Are instructions available for using the coefficients generated by TIBQ with the TLV320AIC33 codec?
In particular, TIBQ generates N0,N1,D1 or N0,N1,N2,D1,D2 coefficients.
My filter (20Hz Hi Pass, 10KHz Low Pass) generated…
Part Number: TLV320AIC33 Other Parts Discussed in Thread: TLV320AIC3106 , , TLV320AIC3107 , TSC2117 , TLV320AIC3212 Is it reasonable to use LINE_OUT_L+ / LINE_OUT_R+ to provide a stereo SE Line Output via coupling capacitor and RC filter (100 ohm / 47nF…
Part Number: TLV320AIC33 Other Parts Discussed in Thread: PCM3070 The TLV320AIC FAQ says:
The recommendation for unused inputs on TI's Audio ADCs and CODECs is to provide an AC termination to GND through a ~0.47uF capacitor to prevent noise-pickup on…