Part Number: TLV320DAC3101 Hi Ti Team，
Many models of our company use TLV320DAC3101. We found obvious noise during use, and we suspected that the PCB layout did not separate the ground. Can you provide us with the TLV320DAC3101 demo board PCB file for…
Part Number: TLV320DAC3101 Hi there, I had some questions regrading powering the TLV320DAC3101
Per the datasheet, these are the following rails: AVDD: 2.7-3.6V DVDD: 1.65-1.95V HPVDD: 2.7-3.6V SPLVDD: 2.7-5.5V SPRVDD: 2.7-5.5V IOVDD: 1.1-3.6V
…
Part Number: TLV320DAC3101 Hi Ti Team,
I have a customer who is using TLV320DAC3101, and currently encounters some problems during the debugging process, and needs to provide the DRC.EQ guide file as a reference.
Part Number: TLV320DAC3101 Other Parts Discussed in Thread: TLV320AIC3100 Hi TI Tteam：
Did you have TLV320DAC3101 driver ,if you have ,Please give me
Thanks
CQ.LV
Part Number: TLV320DAC3101 hi
I want to know TLV320DAC3101's power consumption with specific voltage condition when it plays sound.
condition : playback to 8Ohm stereo speakers, slave mode(0dB FS 1kHz signal)
example :
AVDD 3.3V, ?? mA, SLVDD…
Part Number: TLV320DAC3101 Hi,, Im Roman and i'm working with a ESP32 and a TVl320DAC3101 on a custom made PCB. I'm programming with Arduino with the ESP32 Dev Modul Board. I can set and read all Register with I2C. With I2S i am sending the Sounddata…
Part Number: TLV320DAC3101 Hello,
I would like to ask to one question for the power of TLV320DAC3101.
Question:
Are the rise and fall time of each power supplies specified?
In our project, each power are as follows.
DVDD: 1.8[V]
IOVDD…
Part Number: TLV320DAC3101 Hi sir,
Do you mean we need to set power up timing of VDD and rest by ourself?
What is the purpose for controlling the timing?
Thank you.
Part Number: TLV320DAC3101 Hi sir,
Could you help to check below questions?
While the power of the terminal is ON but no output/input through speaker/mic, power to the speaker amplifier (TLV320DAC3101) continues to be supplied. In this case, is the…
Part Number: TLV320DAC3101 Hi
If I used TLV320DAC3101 only for Speaker Amp and no need for Headphone signal, could the AN1/AN2, HPL/HPR, MICBIAS/MICDET pin be floating? or should I pull high or pull down?
thank you
