Because of the Thanksgiving holiday in the U.S., TI E2E™ design support forum responses may be delayed from November 25 through December 2. Thank you for your patience.
Part Number: TLV320DAC3203 Other Parts Discussed in Thread: TAD5212 Tool/software: Hi Ti Support,
We are going to integrate TLV320DAC3203IRGER with ESP32-S3 via I2S as a single chip without its output connected directly to the ear/headphone via Audio…
Part Number: TLV320DAC3203 Tool/software: Hi Ti,
As per we are using TLV320DAC3203 with internally A-LDO enabled to have 1.8V at AVDD without any external regulator on this pin. Our LDOIN and IOVDD is at 3.1V and we have DVDD via separate 1.8V regulator…
Part Number: TLV320DAC3203 Tool/software: Hi,
we need an audio codec to convert analog audio data comming from/to a Smartphone headset jack to digital (I2S) data.
Therefore we have planed to use the TLV320DAC3203.
The speaker output of the Smartphone…
Part Number: TLV320DAC3203 Tool/software: Hi TI support,
We are using going to add TLV320DAC3203 as a Audio DAC with its going to the headphone. Our MCU is at 3.1V so all the IOs are at same voltage. As per TLV320DAC3203 datasheet there are LDOIN, Avdd…
Part Number: TLV320DAC3203 Other Parts Discussed in Thread: MSP430FR2633 Tool/software: Hi dear people,
I encounter a discrepancy between the recommended setting for Page 0 / Register 29: Audio Interface Setting Register 3 - 0x00 / 0x1D and that what…
Part Number: TLV320DAC3203 Tool/software: Hi Ivan,
I am sorry, I still have difficultys to get my board working propperly.
Some things are still not clear for me. I have a working code on the EVAL board and as far as I can see, this is also working on…
Part Number: TLV320DAC3203 Tool/software: Hi,
Is my understanding correct that the over current protection in headphone outputs is non-latching error and TLV320DAC3203 can automatically resume the normal operation if the HPL or HPR short to GND is removed…
Part Number: TLV320DAC3203 Hi,
During sleep mode, our clock (MCLK ) will stop providing DAC3203 ..
But during this condition , we wish to produce the beep by DAC3203 from its beep generator .
In order for the beep generator to be able to produce the …
Part Number: TLV320DAC3203 I am using DVDD = 1.8V and IOVDD, LDOIN = 3.3V. Am I correct in assuming the maximum logic levels on Reset, MCLK, SCL, and SDA = 3.6V with this setup?
