Part Number: TLV3601 Hi team
Do you have plan to release TLV3601 SOT23 package option?
Due to supply shortage my customer is interested in this device very much, but the comparator they are using is SOT23 package.
Part Number: TLV3601-Q1 Hello,
One customer need to know the phase noise@1Khz, do we have any reference data about the phase noise of TLV3601-Q1? Thank you very much.
Best regards
kailyn
Part Number: TLV3601-Q1 Other Parts Discussed in Thread: TINA-TI , TLV3601 The current TINA-TI model seems like encrypted and my TINA program does not be able to generate a proper macro model. In TINA program it only shows a block without the pins. Is there…
Hi Raj,
Sorry yes you're right. It will be limited by the toggle frequency and pulse width of the signal going into the TLV3601. Unfortunately we do not have a faster single ended output device that could handle that high of speed.
Hello Gustavo,
Sorry for the delay.
We have many new high speed options. What is the minimum pulse width of your signal?
We have options with speeds from 40ns to 2.5ns, with conventional or LVDS outputs.
See the TLV3201, TLV3501 and TLV3601 families. …
Part Number: TLV3605 Other Parts Discussed in Thread: TLV3801 , TLV3601 Hi,
I would like to check that
1) Can TLV3605 accepts negative voltage (For example -1.7V) at its VEE pin?
2) Do the LVDS output refers to the VEE pin as its ground reference? If…
Hello Bisso,
Do you need the shutdown? Does it need to be in the same pinout? Can you use a dual? Any package preferences? Prefer low cost or better performance?
There are several options. See out the LMV7219, TLV3201, TLV3501, TLV3601. There is also…
Hi Alex,
Are you looking to operate split supply to allow for the common mode input voltage to go negative? Keep in the mind the output will now swing negative VEE to VCC. With that speed, we have TLV3601 and TLV3501.
If you would like to go split supply…
Part Number: LM2901 Other Parts Discussed in Thread: TLV9032 , TLV3601 , TLV3201 , TLV3501 , TLV4376 Dear TI team,
I am using comparator IC LM2901PWR for 5A and -5A resonant current detection of bidirectional CLLLC converter. Resonant current will vary from…
Patrick,
I am still figuring out the issue with TLV3603 which may take some time. As a temporary fix, I replaced it with the TLV3601 (same device without the LE/HYS pin) and I am having it emulate a 35mV hysteresis just like how you're setting up the…