Part Number: TLV5630 Hey Guys,
We are using TLV5630 and its datasheet says that, the LDAC pin should be pull low after write data to TLV5630.
but we don't have more DSP GPIO to do this now. Can we just pull LDAC pin to low level (grounded to GND)…
Part Number: TLV5630 Other Parts Discussed in Thread: DAC43204 , DAC43508 Hi Dear,
The customer uses TVL5630, with two output channels connected in parallel and set as dual complementary outputs, but the temperature range can only support -40…
Part Number: TLV5630 Hello,
For this device, if there are unused DAC outputs (DAC outputs A, B, C, D, E, F, G and H on pins 12-15, 6-9), does the unused pin need to be resistively pulled to ground (e.g. with a 5k resistor)? Or can unused DAC outputs…
Divesh,
As the TLV5630 does include a DOUT pin for the SPI interface one option is to perform a read-back to isolate digital versus analog domain issues when troubleshooting. All of the register contents default to 0's, though, so you would probably…
Thank you for your response and sorry for late reply.
I am using the 12 bit version of TLV5630. The data sheet for TLV5630 says that for choosing the DAC channel I have to use the four bits A0A1A2A3. Suppose if you look at the data sheet you will see…
Part Number: TLV5630 Hi,
We are using TLV5630 (12-bit) DAC in our application and have a confusion related to the reference voltage usage. We plan to use to the REF pin as OUTPUT, that is, internally generated reference voltage. We have DVDD and AVDD…
Part Number: TLV5630 Hello everybody ,
please I am using A f28065 (c2000 ) to drive a TLV5630 . my SPI is @ 2.5 MHz and in attach one scope screenshot of my command .
It seems like in this post
“ https://e2e.ti.com/support/data-converters/f/73/t…
Part Number: TMS320F28065 Other Parts Discussed in Thread: TLV5630 , C2000WARE Hello everybody ,
please do you have any example code / ref on using TLV5630 from a F28065 ?
any indication / suggestion is very welcome
thank you
regards
Carlo
