• TLV61048: Solution for output is completely disconnected from the Boost TLV61048

  

  Hung Ta

  TI Thinks Resolved

  Part Number: TLV61048 Other Parts Discussed in Thread: TPS61372L I would like to completely disconnect the load from the power supply when using the TLV61048 boost converter, without adding an external P-FET or relay. It seems that the EN pin only disables…

  • 18 days ago
  • Power management
  • Power management forum

• TLV61048: TLV61048 USE?

  

  Simba Su

  Part Number: TLV61048 Tool/software: Using TLV61048, the input voltage is 3.3V, the output is 5V, 9V, 12V, according to the datasheet R1 select 698K, and then the different circuit output three different voltages, after testing found that the board has…

  • over 1 year ago
  • Power management
  • Power management forum

• TLV61048: TLV61048

  

  DG

  TI Thinks Resolved

  Part Number: TLV61048 Other Parts Discussed in Thread: TLV61047 Tool/software: Dear TI-Team, I soldered two identical prototypes with the TLV61048DBVR on it. All components are the same (on both prototypes). The problem is, that on one PCB the output…

  • over 1 year ago
  • Power management
  • Power management forum

• TLV61048: Schematic review

  

  Jeff YANG

  TI Thinks Resolved

  Part Number: TLV61048 Hi, Would you please help us check the below schematic is fine? Inductor choose 4.7uH is okay? Iout = 200mA. Thanks! Jeff

  • 1 month ago
  • Power management
  • Power management forum

• TLV61048: Schematic Review for TLV61048 - URGENT

  

  Iman El-Bawab

  Part Number: TLV61048 Tool/software: Hi team, Can someone review the attached schematic for a Ford program? It features the TLV61048 . I have been trying to reach someone via email since Monday with no luck which is why this request is considered urgent…

  • over 1 year ago
  • Power management
  • Power management forum

• TLV61048: Regarding TLV61048 Boost Simulation in PSpice for TI and Tina.

  

  Gayathri Palla

  Part Number: TLV61048 Tool/software: Hi Team, Iam simulating TLV61048DBVR in PSpice for TI and Tina. Output voltage is 5V in PSpice for TI where as in Tina output voltage is 8V and settings derived for 6V. As per the datasheet, the feedback resistor…

  • over 1 year ago
  • Power management
  • Power management forum

• TLV61048: Boost regulator overshoot on startup

  

  Thomas Miller

  Part Number: TLV61048 Tool/software: We are using this part to drive a 9V Stepper Motor controller from a 5V USB-C source. We are seeing startup overshoot of up to 14.5V, damaging the controllers.

  • 8 months ago
  • Power management
  • Power management forum

• TLV61048: Boost converter to charge a 13V battery from a 5v source

  

  Johann van Niekerk

  TI Thinks Resolved

  Part Number: TLV61048 Other Parts Discussed in Thread: TPS62172 , BQ25790 Tool/software: Looking at a new project and trying to evaluate the solution. I have a 13.2 Battery that's only 100mAh capacity that i need to charge. a 50mA continues charger…

  • 6 months ago
  • Power management
  • Power management forum

• TLV61048: Can Meeting Clinet spec?

  

  Lawrence He

  Part Number: TLV61048 Tool/software: Hi, Support Team Our client Panel Spec is: VDD= 2.3V to 2.7V and Typ=2.5V AVDD= 8V to 8.4V and Typ=8.2V IAVDD= 46.7mA to 115mA and Typ=72.1mA so about TLV61048 could workable? if any suggestion, Please…

  • over 1 year ago
  • Power management
  • Power management forum
Answered

• TLV61048: About thermal shutdown behavier

  

  teritama

  Resolved

  Part Number: TLV61048 Tool/software: Hi team, After thermal shutdown event occure,does this device start up again by junction temperature dicreasing? or needs enable control? Best regards, teritama

  • Resolved

  • over 1 year ago
  • Power management
  • Power management forum

Didn't find what you are looking for? Post a new question.