Part Number: TPS60120 Other Parts Discussed in Thread: TLV61070A Tool/software: Hi~.
There is a difference in layout between "datasheet Figure 8-13" and "ek manual Figure 4-1."
Cin and Rfb positions are different, and the connection…
Part Number: TLV61046A Other Parts Discussed in Thread: TLV61220 , TLV61070A Tool/software: hi Sir
I survey the LTC3400 to do the circuit, also see TI have a TLV61046a, does they P2P?
and, may i know how the efficiency of TLV61046A in Vin 1.8V; Vout …
Hi Brigitte,
Thanks a lot for your information.
Hi Jet,
TLV61070A can be the choice which works in Vin = 2.6V to 3.8V and Vout = 5V. And then used the recommended LM5118 to generate the Vout = 3.3V to 28V.
Regards
Lei
Hi Lei, thank you for your quick response. Yes, these two voltages +5.5V and -5.5V are suitable for me if can able to get a constant output at as long as it can deliver the desired currents. Because due to input offset voltage Characteristic of the opamp…
Part Number: TPS61033 Other Parts Discussed in Thread: TPS61023 , TLV61070A , , TPS61029 Hi support team,
Are there any products that have Pass-through mode and FPWM function and have a smaller current limit (about 2A)? TPS61033 has a large current limit…
Hi Dice,
No, they are different, for TPS61023 and TLV61070A, it is about 200mA, for TPS61020, it is 0A.
By the way, the low limit is not a very accurate value, because we don't make correlation, so the results is only for reference.
And I recommend…
Hi Christian,
You could consider the new part TLV61070A, which has better efficiency performance, higher current capability.
TLV61070A could support VIN>=Vout application. When Vin is higher than setting Vout, the high side FET is always ON and Vout follows…