• TLV62084: Higher Current Consumption

  

  Rajasree S

  TI Thinks Resolved

  Part Number: TLV62084 We have designed a buck regulator that gives 1.05V output from 5V input using TLV62084DSGR. The load shoud draw 107mA RMS as per datasheet, but it drew 900mA peak to peak, 350mA RMS instead, which is a very lare deviation. 1uH inductor…

  • 3 months ago
  • Power management
  • Power management forum

• TLV62084: Part Received in Non MBB bag

  

  deepasri S

  TI Thinks Resolved

  Part Number: TLV62084 Please find the below observations from the recent shipment. The datasheet specifies an MSL of 2, whereas the physical part is marked as MSL 1. Additionally, the part was received without MBB packaging. Please check and share the…

  • 6 months ago
  • Wi-Fi
  • Wi-Fi forum

• TLV62084: Need Footprint Compatible LDO

  

  Rajasree S

  TI Thinks Resolved

  Part Number: TLV62084 Other Parts Discussed in Thread: TPS7A21-Q1 , TPS7A74 , TLV1117 , LM1117 , LP2951 , TLV62084DSGR is currently used for stepping down 5V to 1.05V. Is there any footprint compatible LDO replacement for this switcher.

  • 5 months ago
  • Power management
  • Power management forum

• TLV62084: Question on reducing output capacitance for LPDDR power supply (0.5V / 2A)

  

  David Kim2

  TI Thinks Resolved

  Part Number: TLV62084 Hi TI Team, I am designing a power supply circuit using the TLV62084 with an output of 0.5V / 2A , which will be used as a power rail for LPDDR memory . According to the TLV62084 datasheet recommendations, the standard setup…

  • 3 months ago
  • Power management
  • Power management forum
Answered

• TLV62084: Request review the SCH.

  

  David Kim2

  Resolved

  Part Number: TLV62084 Hi We would like to request a schematic review.( Total: SCH 2ea) The specifications are as follows. Input: 3.3V Output: 0.5V 2A Please review and confirm whether there are any issues. Thanks

  • Resolved

  • 8 months ago
  • Power management
  • Power management forum

• TLV62084: Request review of schematic, PCB, and waveforms

  

  David Kim2

  TI Thinks Resolved

  Part Number: TLV62084 Hi We have received a request from our customer to review the schematic, PCB layout, and measured waveforms related to this device. However, due to confidentiality and security restrictions , we are not able to upload these materials…

  • 8 months ago
  • Power management
  • Power management forum

• TLV62084: tlv62084dsgr

  

  harish padmanabhan

  Part Number: TLV62084 Tool/software: I'm using this for 3.3v to 1.5v conversion. My active load current is 800mA. why is my Vos pin getting short with ground, what are the different reasons it could happen?

  • over 1 year ago
  • Power management
  • Power management forum

• TLV62084: Short found in Vos and FB pins

  

  Vignesh P

  Part Number: TLV62084 Other Parts Discussed in Thread: TSER953 , Tool/software: I am using the part " TLV62084DSGR" for step down the 3.3V to 1.2V power supply (refer the image below) for our V3 link (TSER953) based product. During field test, few of…

  • over 1 year ago
  • Power management
  • Power management forum

• TLV62084: Noisy output waveform reg.

  

  Siddhaarth R

  TI Thinks Resolved

  Part Number: TLV62084 Tool/software: I have a 5V regulator supplying power to a 1.2V regulator (TLV62084) and a 3.3V regulator, The 1.2V regulator has a noise of about 300mV in the output of the regulator which causes a noise of about 400mV in my 5V regulator…

  • over 1 year ago
  • Power management
  • Power management forum
Answered

• TLV62084: TLV62084 Switching Frequency vs Load Current Characteristics

  

  Michael Jeong1

  Resolved

  Part Number: TLV62084 Hello Expert, Our customer want to this data as below condition. I found graph at only Vout 2.5V condition on the data sheet. * Condition : Vin 5V, Vout 1.2V Could you please send this data? Best regards, Michael

  • Resolved

  • over 4 years ago
  • Power management
  • Power management forum

Didn't find what you are looking for? Post a new question.