Part Number: TLV62150 Tool/software: Hi,
Good day.
Customer feedback that they encountered solderability test failed on the received parts (PN#TLV62150RGTR). You can refer to the picture that provided in below.
According to customer, they unable…
Part Number: TLV62150 Other Parts Discussed in Thread: TPS62150A , TPS62147 Hello team,
could you please specify which are the enhancements from the TLV62150 to the TPS62150A? Is it just a matter of added features or does it have better efficiency…
Hi Antonio,
Why does he want to use so much and these specific caps? Is this coming as a recommendation from the GSM module?
I recommend keeping a single 22 uF ceramic at the DC/DC output to absorb the ripple current with low impedance.
The transient…
Part Number: TLV62150 Other Parts Discussed in Thread: TPS54320
Hi,
My customer is considering to use TLV62150 on VIN=15V, VOUT=1.2V condition.
I think that switching frequency is expanded in this case from setting one(1.25MHz or 2.5MHz).
Is this…
Part Number: TLV62150 Other Parts Discussed in Thread: TPS62160 Dear team,
Could you please help to recommend a 17V/1A buck similar to TLV62150, but smaller size, lower quiescent current?
The output voltage are 3.3 or 5V.
Thank you.
Kane
Hello Sakai-san,
The minimum current limit of TLV62150 is 1.4A which is exceeded at fsw=1.25MHz for the above test conditions. The typical current limit is 1.7A for this device but WEBENCH models always take the minimum value. If fsw is increased to…
Part Number: TLV62150 Team,
I have a customer examining the TLV62150 for an upcoming design, and they want to know if it is ok to utilize any other type of capacitor apart from ceramic? From sections 9.2.2.2.2.1 and 2 of the datasheet, it looks like…
Hi Bjorn,
- Required maximum output current? 2A - Required output voltage? 3.6V - Is the solution size critical? No particular specs, smaller footprint is better though
Many Thanks,
Antonio
Part Number: TLV62150 Hi,
I asked the maximum rating on the negative side of the SW pin in the following thread. I understand that the inductor current flows during the dead time period. This time, I would like to ask about that dead time. Attach the…
Part Number: TLV62150 Other Parts Discussed in Thread: TLV62130 Hi,
I previously asked about the behavior of negative voltage in the following thread. It was caused by the current flowing in the body diode of the FET. I understood the cause of the negative…
