Hi everybody,
I downloaded the last version of PurePath Studio for AIC3254, but when I try to generate my processflow created with an older version, I've got the following errors :
Generating code for main_Rate44 .. assembling ...MemoryType…
My configuration:
DM-816x EVM
Arago-generated filesystem (based on git://arago-project.org/git/people/siddharth/arago-c6a8.git and versions corresponding to EZSDK 5.04.00.11)
Qt Embedded 4.7.4
Graphics setup:
root@dm816x-evm:~# sh ./gfx_check…
Part Number: TM4C123GH6PM Other Parts Discussed in Thread: EK-TM4C123GXL Tool/software: Code Composer Studio I have an issue with CAN Bus connection
TX
#include <stdbool.h>
#include <stdint.h>
#include "inc/hw_can.h"
#include "inc/hw_ints.h"
#include…
Hello all,
I am facing issues in mounting through nfs.
The output of printenv is as follows and i have kept the board in dhcp mode:
bootdelay=4 baudrate=115200 setboot=setenv bootargs $(bootargs) bootamd=nboot 0x80700000 0 0x500000;bootm bootfile…
Hello Hiroyasu,
I attached some design tools you use to further estimate the VIN ripple with respect to the CIN and VIN. Use equation 7 and 8 from the datasheet to figure our the required ESR. ESR is another parameter that you need to lower as possible…
Danilo,
I had issues the first time as well, and the thing that finally solved it was restarting my computer after the driver installation.
I tried to document all the steps in the attached Stellaris InstaSPIN-BLDC Lab
(this will be in the next…
Other Parts Discussed in Thread: CC3100 , CC3200 , CC3120 , WILINK8-WIFI-NLCP
2 Jan 2018, 9:30AM (CT)
FWs for WL6/7/8 were applied to linux-firmware mainline.
Please note that new Wilink6/7 service pack has been released.
The version is: R5SP9…
Other Parts Discussed in Thread: CCSTUDIO hello. I am trying to implement a simple equilizer using three FIR filter -LPF, BPF and a HPF, on DSK6713 board using ccstudio v4.1.
The output audio I am getting is very noisy. I have generated filter coeffients…
Our original f28027f.cmd is
MEMORY
{
PAGE 0: /* Program Memory */
/* Memory (RAM/FLASH/OTP) blocks can be moved to PAGE1 for data allocation */
OTP : origin = 0x3D7800, length = 0x000400 /* on-chip OTP */
CSM_RSVD : origin = 0x3F7F80, length…
Part Number: WL1837MOD Other Parts Discussed in Thread: WL1837 Hello,
We have some customers complaining about frequent loss of Wi-Fi with good signal strength with the AP.
We use WL1837 for our Wi-Fi solution.
Here is some info that may help: …
