• TLV741P: Output overshoot for 2.5mS

  

  Wesley Huang

  Part Number: TLV741P Hi team ， When LDO is used to supply power to LPDDR4, there is a large start-up overshoot in Vout at the moment when Vin is powered on. The waveform is shown in the figure below, and the amplitude is about 1.9V. After replacing several…

  • 2 months ago
  • Power management
  • Power management forum
Answered

• TLV741P: Effective capacitance for output capacitor

  

  Takashi Yamaguchi

  Resolved

  Part Number: TLV741P Hi team, My customer is considering to use the TLV741P. The d/s recommends minimum 1uF for output capacitor. Could you tell me the minimum effective capacitance required for the output cap? Regards, Yamaguchi

  • Resolved

  • 3 months ago
  • Power management
  • Power management forum

• RE: TLV741P: Thermal Resistance Transient

  

  Kyle Van Renterghem

  Hi Hideki, Yes please loop me in while Juliette is out and we can work on this offline.

  • 3 months ago
  • Power management
  • Power management forum
Answered

• TLV741P: UVLO for different outputs of TLV741P

  

  sergey gaydashev

  Resolved

  Part Number: TLV741P Hello. I want to use TLV74133 and have one question about UVLO level. Am I right, that UVLO level is common for different outputs of TLV741 and it is 1.4V? For example, for LDO TLV74133 and for TLV74118 this level is 1.4V? It very…

  • Resolved

  • 8 months ago
  • Power management
  • Power management forum

• TLV741P: PSRR

  

  Kazuki Kitajima

  TI Thinks Resolved

  Part Number: TLV741P Hello team, This might be basic question but can we use fig10 for Vin3.3V, Vout2.5V as well? The customer is a little bit concerned about it. If there's no big differences between Vout2.5V vs Vout1.8V, I'm going to tell the customer…

  • over 1 year ago
  • Power management
  • Power management forum
Answered

• TLV741P: Differences between TLV713P and TLV741

  

  Kazuhiko Hirano

  Resolved

  Part Number: TLV741P Other Parts Discussed in Thread: TLV713P , , TLV713 Hello, What are the differences between TLV713P and TLV741P, though their 1k prices are very different? Best regards, K.Hirano

  • Resolved

  • over 1 year ago
  • Power management
  • Power management forum
Answered

• TLV741P: Proprietary Non Halide Flame Retardant CAS number missing.

  

  ZY

  Resolved

  Part Number: TLV741P Hi TI, I am filling Chemsherpa document for customer. However for TLV741P series, The CAS number of "Proprietary Non Halide Flame Retardant" is missing. Possible to get CAS number of Proprietary Non Halide Flame Retardant…

  • Resolved

  • over 1 year ago
  • Power management
  • Power management forum

• TLV741P: he marking on the TLV74133PDBVR

  

  Hope Chen

  TI Thinks Resolved

  Part Number: TLV741P Hi, I can't find the marking on the TLV74133PDBVR, would you please help check it My customer need the marking info Thanks a lot

  • over 2 years ago
  • Power management
  • Power management forum

• TLV741P: Max Curretn Limit of TLV741P

  

  takahiko yokota

  TI Thinks Resolved

  Part Number: TLV741P Hi Minimum current limit of TLV741P is written 180mA in datasheet. Could you tell me the maximum current limit of TLV741P? Best regards, Yokota

  • over 3 years ago
  • Power management
  • Power management forum
Answered

• TLV741P: Foldback Current Limit Of TLV741P

  

  Philip

  Resolved

  Part Number: TLV741P Hi, I refer to Figure 18 3.3V Output Voltage vs Output Current (Foldback Current Limit) of TLV741P spec Based on the graph, for 3.3V output, does it mean that the output current can be up to approximately 240mA? From Electrical Characteristics…

  • Resolved

  • over 3 years ago
  • Power management
  • Power management forum

Didn't find what you are looking for? Post a new question.