Part Number: TLVM13620 Hi team,
Is it possible to create a negative power supply for the TLVM136x0? If so, I would like to know how to connect it. Or, if you have an application note, I would like to have it.
Part Number: TLVM13620 Hi support team,
Is it best to float the SW pin of TLVM136x0 and TPSM6360x and not connect SW pin to the board?
The data sheet has the following description.
Is it better to use the SW pin only for evaluation and trial production…
Part Number: TLVM13620 Other Parts Discussed in Thread: TLVM13640 , , TPSM63602 , TPSM63604 Hi,
Please let us know in case we will introduce these devices to our customers. About the package. Package of TLVM13620 / 30 are 30pin, but TLVM13640 / 60 are 20pin…
Part Number: TLVM13620 Other Parts Discussed in Thread: TLVM13630 , , TPSM63602 Hi support team,
I think that TLVM13620 and TLVM13630 do not have the "Adjustable Switch-Node Slew Rate (RBOOT and CBOOT)" function.
Are the following descriptions…
Part Number: TLVM13620 Other Parts Discussed in Thread: TLVM13640 , TPSM63602
Hi support team,
Is TLVM136x0 a low cost version of TPSM6360x? Are these differences below?
1 to 16V
1 to 16V
Part Number: TLVM13620 Other Parts Discussed in Thread: TPS62160 Hi support team,
Is it prohibited to connect an RC snubber to the SW pin of TLVM136x0 and TPSM6360x?
There is the following description. Page-4 of SLVSGL2
Part Number: TLVM13630 Other Parts Discussed in Thread: TLVM13620 , Hi Team,
the TLVM13620 should as per DS comply with CISPR 32 class B emission, is this only for radiated emissions? and for conducted emissions it still needs an LC filter on input?
Part Number: LM2672 Other Parts Discussed in Thread: LM22672 , TLVM13620 Hi to all,
I have a question regarding the LM2672MX-ADJ/NOPB.
As there are supply issues with this part and with all fixed voltage derivates!!
Is there a possible P2P replacement…
Part Number: TL2575-05 Other Parts Discussed in Thread: TLVM13620 I'm currently using a TL2575 for a application with the following values:
Vin = 24V
Vout = 5V
Peak Iout = 750mA
I have a 100uF input capacitor, 330uF output capacitor and 330uH inductor…
The only advice I have to share is recommend a device which has higher throughput in TI factories.
Tlvm13620 and TPSM63602 is being manufactured on a larger wafer in comparison to than older-gen devices and will be ramping across TI recently…