Part Number: TM4C1230H6PM Hi champs,
I would like to know the difference between TM4C1260H6PMI and TM4C1260H6PMI7 devices.
Please advise, thanks for your help.
Luke
Part Number: TM4C1230H6PM i have used SSI1 module over Port D .
SSICLK-PD0 (Pin no 61)
SSIRX -PD2 (Pin no 63)
SSITX-PD3 (Pin no 64)
Chip select - PD1 (Pin no 62)
I am confused that we have to compulsory configure CS pin as SSI1Fss or we can configure…
Part Number: TM4C1230H6PM I am using above mentioned MCU with CCS Version: 10.3.1.00003 .
I have created two project one is bootloader and second is actual application.
In bootloader i have used ARM compiler having version TI v20.2.4 LTS and have generated…
Part Number: TM4C1230H6PM I was about to place an order for some Parts TM4C123GH6PMIR parts since they are cheaper than the TM4C123GH6PMI (no "R" at the end) by a couple of bucks. However, when I went to place the order on the TI site, the checkout…
Part Number: TM4C1230H6PM Other Parts Discussed in Thread: TM4C123 Hi,
I am trying to create a custom flash bootloader for TM4C1230H6PM which needs to update my application firmware over the CAN bus. Until now, I have accomplished the following things…
Part Number: TM4C1230H6PM Hi
Ref. to data sheet:
DS-TM4C123GH6PM-15842.2741 SPMS376E
Register 14: GPTM Timer A Prescale (GPTMTAPR), offset 0x038
"When in one-shot or periodic down count modes, this register acts as a true prescaler for the timer counter…
Part Number: TM4C1230H6PM
Hi guys,
I am working on a product for which the hardware layout and pin-out does not allow me to use my PWM assigned ports. For this reason I am trying to generate one via SW using a Digital Output port.
This is working fine…
Part Number: TM4C1230H6PM Other Parts Discussed in Thread: CODECOMPOSER , EK-TM4C123GXL , TM4C123GH6PM Tool/software: Code Composer Studio I'm able to use both codecomposer and the LM Flash Programmer to load and run my application. I would like to be…
Part Number: TM4C1230H6PM Other Parts Discussed in Thread: TM4C123 Hi,
It's been long time, so hello to everyone!
I'm in the developers state of a self made board, and so far all went fine.
On the board there are two RS485 ports, connected to…
Part Number: TM4C1230H6PM I want to use TimerA of TIMER0_BASE with Prescale, and the code is following :
SysCtlPeripheralEnable(SYSCTL_PERIPH_TIMER0); while(!SysCtlPeripheralReady(SYSCTL_PERIPH_TIMER0)){}
TimerConfigure(TIMER0_BASE, TIMER_CFG_A_PERIODIC…