the 3-ph inverter boards are the same / compatible with any of the controlCARDs.
There is older controlSUITE examples for TMDSCNCDF28835, TMDSCNCD28035
and older MotorWare examples for TMDSCNCD28069MISO, TMDSCNCD28054MISO, TMDSCNCD28027F
and newer C2000Ware…
What maximum current and voltage do you need for the motor drive? You can refer to the table below to select a replacement.
Universal Motor Control Lab with Sensorless -FOC (InstaSPIN-FAST/ eSMO ) or Sensored-FOC(Incremental Encoder) for BLDC/PMSM
…
Aditya Kelkar said: Is there any relation with the PWM Carrier frequency?
You may select the right PWM frequency according to the motor and the power board you used. The control frequency could be 3~25kHz for FAST estimator on F28002x, the PWM frequency…
Currently, this lab only supports DRV8323RH for F28002x and F28003x. You may try to use the lab without Sysconfig as below.
You may refer to the lab in motor control SDK. The universal motor control lab is available in the current MCSDK, which can support…
You have to run the lab within CCS, the GUI doesn't support this Launch-xl F280039C with DRV8316R.
You may refer to the lab in motor control SDK. The universal motor control lab is available in the current MCSDK, which can support a set of hardware…
You may refer to the lab for the newer C2000 device in motor control SDK. The universal motor control lab is available in the current MCSDK, which can support a set of hardware kits and control algorithms for BLDC/PMSM drive. The kits include LAUNCHXL…
It's just a hardware design, there is no example code for this board.
https://www.ti.com/tool/TIDA-060030?keyMatch=TIDA-060030
The universal motor control lab is available in the current MCSDK, which can support a set of hardware kits and control…
Gl said: That is not a real world solution for determining motor ID with multiple motors., like 4 motor drone. Each motor will have various inductance that changes with the weather. Seemingly the entire inductance concept is not without issues that AI could…
Yes, you need to use the software FAST library as the universal motor control lab in motor control SDK as below. You have to migrate this lab to F2838x by yourself. It could be easy for you, just need to change the three files (hal.c, hal.h, and user_mtr1…
You can use the eCAP to measure the period of the output pulse of the hall sensor.
You can refer to the universal motor control lab that is available in the current MCSDK, which can support a set of hardware kits and control algorithms for BLDC/PMSM drive…