Part Number: TMDSCNCD280039C TMS320F280039C
Hello,
I have taken the TIDA_010062 as a reference for my own project and started making some modifications accordingly. The setup is working with 4 ePWM modules (including one ePWM module for control purposes…
Part Number: TIEVM-HV-1PH-DCAC Other Parts Discussed in Thread: TMDSCNCD280049C , TMS320F280039C , TMS320F280049C , TMDSCNCD280039C , C2000WARE Hello:
I am working on building the prototype for TIEVM-HV-1PH-DCAC Current mode inverter. It requires TMDSCNCD280049C…
Hi Ricky,
unfortunately, flashing with logging takes a very long (!) time in my current configuration, but I hope I can provide the log-files tomorrow.
Greetings, Joerg
Part Number: TMDSCNCD280039C Other Parts Discussed in Thread: SYSCONFIG Hello everyone,
I want to achieve the following: Take the output of a Sigma Delta Modulator, use the SDFM of the C2000 to compare it to a threshold CMP1H, and then output the CEVT1…
Robert,
Definitely yes for PMP23126 since I know there was some work done to enable F280039C controlCARD on that design (not released).
Very likely yes on TIDM-02000. Looking through the design guide key signals, all can be supported on the F280039C controlCARD…
Part Number: TMDSCNCD280039C Hi,
I received the evaluation boards listed above and I am trying to open a project and connect with the Control Card in the Docking Station, but I am getting the following error message:
I checked for updated and none were…
Part Number: TMDSCNCD280039C Hi,
When I am trying out the Unlock CPU1 Z1 and Unlock CPU1 Z2 command in the serial_flash_programmer utility it is getting stuck after sending the packet. Kindly help me with this.
Thanks,
Swati
Part Number: TMDSCNCD280039C Other Parts Discussed in Thread: C2000WARE How to configure the switching frequency using ePWM block in Simulink?
First I've set the ePWMLink TBPRD to ePWM1 and got the switching frequency as 2kHz
Then changed ePWMLink…
Part Number: TMDSCNCD280039C Other Parts Discussed in Thread: SYSCONFIG
Hi,
I'm using ePWM in complimentary mode. At the start of the program, I'm getting an undesired short pulse on channel B. Below is my configuration. It is generated by sysconfig.…
Part Number: TMDSCNCD280039C Other Parts Discussed in Thread: C2000WARE I use the demo board of TMDSCNCD280039C. The CCS version is 12.2.0.00009. The import project of timer_ex1_cputimers from C:\ti\c2000\C2000Ware_4_03_00_00\driverlib\f28003x\examples\timer…