Search tips
Showing 26 results View by: Thread Post Sort by

  • RE: TMDSHVRESLLCKIT: TMDSCNCD28027 in the kit doesn't program

    Hi Cody, I restarted CCS and checked the value in the address. Not set to 0xFFFF. I've tried "Erase Flash" and CCS restart several times, but it's not set to 0xFFFF. I don't have another F2802xcontrolCARD and can't replace it.…
    • Answered

  • CCS/TMDSCNCD28027: GUI Composer deleted all the widget bindings in my application

    Resolved
    Part Number: TMDSCNCD28027 Other Parts Discussed in Thread: TMDSHVRESLLCKIT , , TMS320F28027 Tool/software: Code Composer Studio Yesterday I was working on my GUI Composer application (version 2.9.0, TI Cloud Tools). It was driving a TMDSCNCD28027 control…
    • Resolved
    • Answered

  • TMDSCNCD28027: Failure to toggle EPWM output (two consecutive pulses of same polarity)

    Resolved
    Part Number: TMDSCNCD28027 I am having issues with the output of EPWM1 of the F28027 control card set up to toggle the output, as follows: EPwm1Regs.AQCTLA.bit.ZRO = 0x3; // when counter = zero toggles EPWM1A output The problem is shown below. The yellow…
    • Resolved
    • Answered

  • TMDSCNCD28027: How to reset the ramp generator when the phase is terminated by a sync event and doesn't reach TBPRD.

    Resolved
    Part Number: TMDSCNCD28027 Other Parts Discussed in Thread: TMS320F28379D I have a variable frequency LLC application where each phase of the F28027 can be terminated by a comparator before reaching the TBPRD value. At this point the TBPHS register is…
    • Resolved

  • TMDSCNCD28027: Electrical schematic for TMDSCNCD28027 DIMM100 based control card

    TI Thinks Resolved
    Part Number: TMDSCNCD28027 Other Parts Discussed in Thread: CONTROLSUITE Dear team, Can you please share the electrical schematic for TMDSCNCD28027 DIMM100 based control card electrical schematics and pinout. I did not managed to find it on the controlSUIT…

  • TMDSCNCD28027: error connecting to target emulation failed

    TI Thinks Resolved
    Part Number: TMDSCNCD28027 Other Parts Discussed in Thread: CCSTUDIO , TMS320F28027 Hi, I have connected a XDS110 Debug Probe (connection) and a TMDSCNCD28027 control card (device) to a DRV8301-HC-EVM Rev D. On CCS, I am able to connect to the target.…
    • Answered

  • RE: LAUNCHXL-F28027F: DRV 8305

    Resolved
    The DRV8305 EVM and LaunchXL-F28027F don't have any interface header for hall sensor. The inverter board mus have the hall sensor interface circuit and header for using LaunchXL-F28027F or F28027F controlCard. If using high voltage kit with F28027F…
    • Answered

  • RE: TMDSCNCD28069MISO: , TMDSCNCD28054MISO, TMDSCNCD28027F Pin mapping

    Resolved
    Hello Santosh, Thank you, I have been able to find the DIMM pin out table for the TMDSCNCD28027, however, this document does not seem to exist for the TMDSCNCD28054 or TMDSCNCD28069? Thanks

  • RE: CCS/TMS320F28027F: ERROR The debug probe reported an error. Confirm debug probe configuration and connections, reset the debug probe, and retry the operation.

    Tyler, Can you comment on which TI tool you are using, either the LAUNCHXL-F28027F or the TMDSCNCD28027? That will help narrow down things to try. Also, this app note has a step by step approach to debugging these initial connection issues if you want…
    • Answered

  • CCS/LAUNCHXL-F28379D: IcePick_C_0: Error connecting to the target: (Error -2131 @ 0x0) Unable to access device register.

    Resolved
    Part Number: LAUNCHXL-F28379D Other Parts Discussed in Thread: TMDSCNCD28027 , C2000WARE , TMS320F28379D , TMDSEMU110-U , TMDSHVRESLLCKIT Tool/software: Code Composer Studio Hi. I have a new LAUNCHXL-F28379D. I have cannot debug the demo program. I get this…
    • Resolved

Didn't find what you are looking for? Post a new question.