Because of the Thanksgiving holiday in the U.S., TI E2E™ design support forum responses may be delayed from November 25 through December 2. Thank you for your patience.
Part Number: TMDSCNCD28069MISO Hello,
I am looking for the pin mapping for these three ControlCARDs, I have been able to find the datasheets for the microcontrollers but not any information on which pins from the microcontroller connect to the pins on…
Part Number: TMDSCNCD28027F Tool/software: Code Composer Studio I am using Simulink to generate a .out file and loading the program to the board. I have only been able to debug, and the board resets to a default blinking LED when I power cycle the device…
Part Number: TMDSHVMTRINSPIN Other Parts Discussed in Thread: TMDSCNCD28027F , , CONTROLSUITE Hi, support team
My customer has the questions as follow:
"We have bought a High Voltage Motor Control Kit (TMDSHVMTRINSPIN) to control a permanent magnet synchronous…
Part Number: TMS320F28027 Other Parts Discussed in Thread: TMDSCNCD28027F I have worked through most of the Instaspin-FOC labs using the TMDSCNCD28069MISO controlCARD with the HVMTR Eval Kit . The Instaspin-FOC solutions in the labs works great for my motor…
Part Number: DRV8301-69M-KIT Other Parts Discussed in Thread: TMDSCNCD28027F , TMDXCNCD28055ISO , TMDSCNCD28035 , DRV8301 , MOTORWARE I have DRV8301-69M-KIT for motor control application.
This Evaluation board supports TMDSCNCD28069MISO ,TMDSCNCD28027F and…
Other Parts Discussed in Thread: TMDSCNCD28027F , TMDSHVMTRINSPIN , MOTORWARE TMDSCNCD28027F+TMDSHVMTRINSPIN +XDS100V3,
I CAN CONNECT THE TARGET, WHEN I LOAD PROGRAM, ccs console show:
C28xx: Error occurred during flash operation: Timed out waiting for target…
Other Parts Discussed in Thread: DRV8343-Q1 , DRV8301-69M-KIT , LVBLDCMTR , TMDSCNCD28027F , MOTORWARE , CONTROLSUITE Hi,
Good Day.
Which evaluation board would be suitable to drive BLDC and SRM motors?
For sensorless operation? DC input.
For low voltage,…
Other Parts Discussed in Thread: TMDSCNCD28027F , TMDSHVMTRINSPIN , MOTORWARE , LAUNCHXL-F28069M Hi all,
I am using TMDSHVMTRINSPIN with TMDSCNCD28027F controlCARD and I am using the on main board XDS100v1 emulator and I made the Main board and Control card…
the 3-ph inverter boards are the same / compatible with any of the controlCARDs.
There is older controlSUITE examples for TMDSCNCDF28835, TMDSCNCD28035
and older MotorWare examples for TMDSCNCD28069MISO, TMDSCNCD28054MISO, TMDSCNCD28027F
and newer C2000Ware…
Is the motor a high voltage (220Vac/350Vdc) or a low voltage motor (<100Vdc)?
Suppose you want to drive a high voltage BLDC motor with InstaSPIN-FOC (180-sinusoidal)m and design an inverter with IPM.
You may try to use TMDSCNCD28027F and TMDSHVMTRINS…
