Hi sir,
Thanks for the reply.
M3 and M6: We have 15V adapter plugged at M6 and a USB cable at M3 (from Laptop). LED is glowing.
CCS settings: We have attached document (dev kits) in Image1, are they correct?
Jumper / Switch settings:
…
Part Number: TMDSHVMTRINSPIN Other Parts Discussed in Thread: TMDSCNCD28027F , , CONTROLSUITE , MOTORWARE Dear Sirs:
we procured TMDSHVMTRINSPIN development kit ,and TMDSCNCD28027F for chip motor controller. Do you have controlsuite sample program used…
Hi sir,thanks for the reply present we don't have drivers problem,we are using TMDSCNCD28027F control card it didn't have usb slot,so we need to use on chip emulator only,but we don't know the switches and aslo new project settings in ccs (software).can…
Other Parts Discussed in Thread: CONTROLSUITE , TMDSCNCD28035 , TMDSCNCD28027F , MOTORWARE , TMDSCNCD28054MISO , C2000WARE-MOTORCONTROL-SDK Good morning,
I am a student at the U niversity of T exas at Dallas. I have been trying to buy a TMDSHVMTRPFCKIT…
Sunil,
what EVM are you using? TMDSCNCD28027F?
If so, you need to configure SW1.
There is a good guide of how to port a RAM code to FLASH in the one-day Workshop. http://processors.wiki.ti.com/index.php/C2000_Archived_Workshops#F28027_Workshops…
Is the motor a high voltage (220Vac/350Vdc) or a low voltage motor (<100Vdc)?
Suppose you want to drive a high voltage BLDC motor with InstaSPIN-FOC (180-sinusoidal)m and design an inverter with IPM.
You may try to use TMDSCNCD28027F and TMDSHVMTRINSPIN…
Part Number: TMDSHVMTRINSPIN Other Parts Discussed in Thread: MOTORWARE
Tool/software: Code Composer Studio
Hello team
we are using TMDSHVMTRINSPIN development kit along with TMDSCNCD28027F control card, when we are going to load the example projects…
Part Number: TMDSHVMTRINSPIN Team,
I have two questions:
Will the TMDSHVMTRINSPIN kit support driving a motor at 80K rpm with FOC? If the kit does not support this will one of the supported devices ( TMDSCNCD28027F , TMDSCNCD28069MISO , TMDSCNCD28054MISO…
1. You should find a silk text (CC2803x ISO DIMM Rev 1.xx) on the control board if it's an isolation controlCard, without "ISO" If it's non-isolation one.
2. Sorry, right, it's J5[M3]. Please refer to below setting.
For controlCARDs with on-card isolated…
Part Number: TMS320F28027F Other Parts Discussed in Thread: TMDSCNCD28027F Tool/software: 代码作曲家工作室 I recently purchased a TMDSCNCD28027F, this controlCARD with Piccolo TMS320F28027FPTT, InstaSPIN ™ -FOC enabled. Used to match Drv8301kit_revD. When the…
