certainly lower the bus voltage.
TMDSCNCD28027F is InstaSPIN enabled, the standard TMDSCNCD28027 is not
However, if you are going to use F2802x I suggest it is cheaper and better to just buy
LAUNCHXL-F28027F
and a boosterpack
BOOSTXL-DRV8301…
Leif,
Sorry that you got confused, but DRV8301-HC-C2 kit mostly shipped with TMS320F28035 control card. If you have this control card, it won't run Insta-spin FOC. Insta-spin foc is aviable only in 3 types of control card, TMDSCNCD28069MISO , TMDSCNCD28054MISO…
Other Parts Discussed in Thread: MOTORWARE , TMDSCNCD28027F Hello,
I'm quite new to InstaSPIN and I've got some difficulties with the Motorware Labs that are provided by TI.
For my tests I'm using the HVMTRKIT_R1P1 and the TMDSCNCD28069MISO controlcard…
Hi Felix,
Yes, I've been using the examples that you say , but I've been seeing that for high power engines , it may be better to use the instaSPIN , but using different controlCARD of which I'm using , for example the TMDSCNCD28027F or TMDSCNCD28069MISO…
OK, yes that is an old kit when we still provided a DVD. Now we just point to the free download.
Did you buy a new controlCARD? The one included in that kit doesn't work with the MotorWare / InstaSPIN projects. For that you need TMDSCNCD28069MISO…
it looks to me like a SW driver issue for the emulator. But if a pin is missing on the header of the DRV8301 that certainly could also be an issue.
I will also note that if using the TMDSCNCD28027 (or 27F) with the DRV8301 EVM you need to fix the enable…
Other Parts Discussed in Thread: TMDSHVMTRINSPIN , TMDSCNCD28027F , MOTORWARE
Easier, faster and more affordable motor development with C2000™ MCUs
Conventional sensorless…
Yes, the high voltage inverter is the exact same, revision 1.1 (R1p1).
For the DMC Library, use the projects in controlSUITE
C:\ti\controlSUITE\development_kits\HVMotorCtrl+PfcKit_v2.1
which primarily use the TMDSCNCD28035 controlCARD and the XDS100v1…
And again like I said before, for Bernt's note, Motorware cannot be used for non InstaSPIN FOC/MOTION MCUs because of the library inside their ROM. Bernt may change the F28035 ControlCard into F28069M ISO ControlCard or F28027F ControlCard or F28054F…
Phillip,
you need more voltage.
"i may have to buy the tmdshvmtrpfckit but is there any way to just buy the driver board and use the controll card and software i already have?"
The software is the same. The tmdshvmtrinspin kit is already kitted…
