Part Number: TMDSCNCD28069ISO Tool/software: I am using the TMDSCNCD28069ISO board to profile the CLA task written in C. I have set up my software to generate an cputimer0 interrupt that calls CLATASK1. CLATASK1 then generates an interrupt after completion…
Part Number: TMDSCNCD28069ISO Other Parts Discussed in Thread: C2000WARE , UNIFLASH Tool/software: Hi Team,
From customer: "I decided to import some projects from C2000Ware to test on TMDSCND28069ISO. I went ahead and downloaded the following projects…
Part Number: TMDSCNCD28069ISO
When I use 'TDSHVMTRINSPIN' inverter board, the 'F2806x ISO control card , Release 0.4' is burned
In more detail, I use 'TDSHVMTRINSPIN' inverter board for running 350W, 220V, 1.4A Interior Permanent Magnet Synchronous…
Part Number: TMDSCNCD28069ISO Hello,
I have the schematic of the Rev 0.3 card (piccolo w' F2806x MCU) but the ctrl cards we buy now is Rev 0.4. What is the design change from 0.3 to 0.4 please?
I attach the design changes from 0.1 to 0.3 taken from…
Part Number: TMDSCNCD28069ISO Other Parts Discussed in Thread: TMDSCNCD28069 , CONTROLSUITE , TMDSCNCD28035ISO , DRV8301 Install the TMDSCNCD28069 ISO control card I'm trying to activate the DRV8301-69-KIT EVM board. Operates the Level1 example code for…
Part Number: TMDSHVMTRINSPIN Other Parts Discussed in Thread: MOTORWARE , TMDSCNCD28069ISO , CONTROLSUITE Hi, I'm using TMDSHVMTRINSPIN evaluation board and used TMDSCNCD28069MISO control card(that is broken during experiment) with Motorware
and I got…
Part Number: TMS320F28069 Hi,
I met exactly the same problem as in the related thread.
And I find the problem happens when I power the board through the docking JP2.
If I power the controlcard through J200 port, the problem is gone and the JTAG…
Thank you for your reply.
I had given power to both the card. However, problem was with the selection of debugger. I used the specific serial number of the on board JTAG emulator to configure the Target, and the problem was resolved.
Part Number: TMDSCNCD28069ISO Other Parts Discussed in Thread: C2000WARE
Hi,
I am using the TMDSCNCD28069ISO control card (release 0.4 TMS 320 F28069MPZT). I have downloaded the boot_loader.out on to the control card. I have connected the micro usb…
