Hi Adil, I would highly recommend downloading and experimenting with the 2010 Teaching ROM that was built around this kit. It does a very good job of going through the ins-and-outs of the device/kit. It can be found in the TMDSPREX28335 product folder…
Hi Matthew
The High Voltage Motor PFC Kit seems for mainly motor control. I want to control switching(of 8 IGBTs) in a DC-DC converter. I already have the tms320f28335 experimenter kit, I believe it requires some step-up voltage circuit hardware and…
Luis, The Peripheral Explorer schematics can be found in controlSUITE: \controlSUITE\development_kits\PeripheralExplorer\TMDSPREX28335-HWDevPackage[R5]\PeripheralExplorerBaseboardHWdevPkg A lot of software examples that work with the F28335 can be found…
Biswajit, I would recommend looking at the C2000 Teaching ROM. It can be downloaded by following the 2010 C2000 Teaching ROM link on the below page: http://www.ti.com/tool/tmdsprex28335 Thank you, Brett
Other Parts Discussed in Thread: TMDSCNCD28335 , TMS320F28335 Hello all,
I am new to C2000 controller. I am using a TMDSCNCD28335 Control card with a TMDSPREX28335 Peripheral Explorer Kit. I have followed the procedure shown in the following video …
Neeraj,
For converting the input signal, you can use the "adc_soc" example in controlSUITE for reference. Keep in mind that the full-scale range of the F28335 ADC is 0V to 3.0V so you will saturate from 3.0V to 3.3V.
I'm not aware of any preexisting…
Yes, TI has an Experimenter's Kit as well as Peripheral kit for the same controller and yes that's totally different hardware. I would like you to go through these links before purchasing:
www.ti.com/.../tmdsdock28335
www.ti.com/.../tmdsprex28335…
Dalen,
Can you share the part number of the board that you are using? Is it this? are you using a control card and simple docking station or are you using the Peripheral Explorer kit?
Please look at those product pages and download the hardware…
Hi,
Yes, you are correct: a different emulator.
From the list you showed, the bottom six are compatible with F28x devices.
In this case you will have to purchase a separate debug probe (the low-cost XDS100 is ok to be used with F28x) or your board…
Other Parts Discussed in Thread: TMS320F28335 , TMDSDOCK28335 , CONTROLSUITE Hi,
I want to start learning C2000 microcontroller and looking for buying an explorer kit. I want to know what is the difference between tmdsprex28335 and TMDSDOCK28335 . The…
