Search tips
Showing 341 results View by: Thread Post Sort by

  • TMDXIDDK379D: fcl_f2837x_tmdxiddk pwm update confusion

    TI Thinks Resolved
    Part Number: TMDXIDDK379D Tool/software: Hello Experts, Could you kindly give us clarity on the below: Looking at the tmdxiddk FOC project located at : there is a function "configurePWM()" which configures the 3 PWM channels. In this function…
    • Answered

  • TMDXIDDK379D: USB-Stick-Read/Write

    Resolved
    Part Number: TMDXIDDK379D Other Parts Discussed in Thread: C2000WARE Tool/software: Hello expert, a very silly question from me. Can I use the F2838xD USB interface to read data from a USB stick or write data to the USB stick? If yes, where are the program…
    • Resolved

  • TMDXIDDK379D: Motor drawing more current and voltage is getting dropped.

    Part Number: TMDXIDDK379D Tool/software: Hi TI experts, We are working on tmdxiddk379d example project on LAUNCH-XL-F28P65X and DRV8343HEVB and now we are on FCL_LEVEL_4 where we want to do speed control. we are running the motor on NO-LOAD. The motor…

  • TMDXIDDK379D: EMJ-04APB22

    Part Number: TMDXIDDK379D Tool/software: As per received motor data sheet from you We hope part number EMJ-04APB22 is suitable for our requirement. But the following clarification need from your side. 01. It can be used as Normal Induction Motor with…

  • RE: TMDXIDDK379D: Motor drawing more current and voltage is getting dropped

    Hi Raghu, Did you run Level 2? In Level 2 did you compare the actual current and the ADC readings? You can use the graph tool in CCS debug window to view the ADC current and this is available in the example code. Thanks, Jiaxin
    • Answered

  • TMDXIDDK379D: TMDXIDDK379D hardware issue with CAN (swapped RX and TX)

    Resolved
    Part Number: TMDXIDDK379D Other Parts Discussed in Thread: ISO1050 Tool/software: Hello all, Just started to work with IDDK on the CAN bus, after not receiving anything from the board, it seemed there is a hardware issue, as can be seen, the CAN_TX and…
    • Resolved

  • TMDXIDDK379D: Clarification on driver boards, shunt resistors and EPWM OST flags

    Part Number: TMDXIDDK379D Tool/software: Hi TI experts, We are looking into tmdxiddk379d project. we want to develop position control using FOC on BLDC motor. we have few questions, 1) what is the driver board suggested, and we are looking forward to use…
    • Answered

  • TMDXIDDK379D: HVPMSMMTR motor - is it suitable?

    Resolved
    Part Number: TMDXIDDK379D Other Parts Discussed in Thread: HVPMSMMTR Tool/software: Hi, I have purchased the TMDXIDDK379D development kit. I found that HVPMSMMTR is recommended. But I am expecting an AC input motor to be connected in its output. But the…
    • Resolved

  • LAUNCHXL-F28379D: Current loop bandwidth comparision between TMDXIDDK379D source and sensored FOC dual axis drive project

    Part Number: LAUNCHXL-F28379D Other Parts Discussed in Thread: C2000WARE , TMDXIDDK379D Tool/software: Hello Experts: We are looking at the way current loop bandwidth is implemented in both projects and found this difference, the macro which calculates…

  • TMDXIDDK379D: About TMDXIDDK379D plug-in board serial port not recognised problem

    Part Number: TMDXIDDK379D Other Parts Discussed in Thread: TMDSCNCD280025C Hello, Ti friends！ Our customer has used this 379D kit before, and has its own related PC software to observe and analyse the related waveforms and data, and has been using it…

Didn't find what you are looking for? Post a new question.