Search tips
Showing 157 results View by: Thread Post Sort by

  • TMP100: TMP100 SDA connected to 3.3V, which is lower than Vcc

    TI Thinks Resolved
    Part Number: TMP100 Hi Team, When customer use TI's digital temperature sensor, they meet a question: SCL is mentioned in the data sheet. The power supply voltage to which the SDA pull-up resistor needs to be connected can be ≥ the chip's power supply…

  • TMP100-Q1: Datasheet Parameter Question

    TI Thinks Resolved
    Part Number: TMP100-Q1 Hi team, I was wondering if you could help with the following question about a specification in the TMP100-Q1 data sheet (SBOS581A –SEPTEMBER 2011–REVISED MAY 2017). In section 7.5 Electrical Characteristics under Temperature…

  • TMP100: I2C Read Issue

    Part Number: TMP100 Other Parts Discussed in Thread: SYSCONFIG We are trying to read the Temperature registers on the TMP100 using an arm chip and face an issue that the 2nd byte is not being sent by the slave. I found this an earlier thread: https://e2e…

  • TMP100: sensor doesn’t respond to request

    Part Number: TMP100 Hello Team, My customer wanted to useTMP100 in one of their projects. They decided to test it before ordering PCB. The sensor was connected to mcu (stm32f072c8t6) via pull up resistors (4.7k each). Address pins were directly connected…

  • TMP100-EP: equivalent voltage divider on ADDx pins

    TI Thinks Resolved
    Part Number: TMP100-EP Other Parts Discussed in Thread: TMP100 , Hello Guys, Good day. Our customer is using TMP100MDBVREP in a space application and cannot leave pins floating due to plasma charging. What equivalent voltage divider can they use on the…
    • Answered

  • TMP100: About CONVERSION TIME@TMP100

    Resolved
    Part Number: TMP100 Hi team. Our customer use this devise in 12bit mode. Is there any problem, if this sensor read in shorter cycle than CONVERSION TIME? best regards.
    • Resolved
    • Answered

  • TMP100: Could not read TMP100

    Resolved
    Part Number: TMP100 Other Parts Discussed in Thread: TCA9511A Hi Team, My customer is evaluating our TMP100 for their temperature sensing, and some times could not access the TMP100 via I2C after some times. Resetting the device by power off/on the device…
    • Resolved

  • TMP100-EP: Thermal resistance Rjc and Rjb

    TI Thinks Resolved
    Part Number: TMP100-EP Other Parts Discussed in Thread: TMP100 Can you share junction to case thermal resistance Rjc and junction to board thermal resistance Rjb of TMP100-EP Thank You. Regards, Gowtham M P
    • Answered

  • TMP100-EP: Certificate of Volatility

    Resolved
    Part Number: TMP100-EP Hi Team, Posting on behalf of our customer. Do we have a certificate of volatility for TMP100-EP? Thanks in advance! Kind Regards, Jejomar
    • Resolved

  • TMP100: TMP100 faulty - no response on I²C

    TI Thinks Resolved
    Part Number: TMP100 In series production and in the field, the components cannot be addressed via I²C or can no longer be addressed. After replacing the component, the application works perfectly. The components are soldered onto a metal core circuit…

Didn't find what you are looking for? Post a new question.