Part Number: TMP110 Tool/software: Hi experts
I have a customer Oxxx is developing TMP110, could you please help confirm some questions: The I2C voltage is 1.2V
1. What is the voltage operating range of the TMP110D digital sensor IIC? The current…
Part Number: TMP110 Tool/software: H all.
i would like to use temperature sensors item TMP110Dx, i will use the nominal requested power in the data sheet which is 3.3v.
the output alert pin is an open drain, can i connect it to a different voltage…
Part Number: TMP110 Tool/software: Here is the schematic. please check if below configurations are ok or not?
1. AC40 is 0.1uF/50V
2. Both SDA/SCL pins are pulled up to 5V with 10KOHM. (10KOhm is not showed on the schematic, since it's located at…
Part Number: TMP110 Tool/software: Hi,
I am writing to seek clarification on the operational characteristics of the TI TMP110 temperature sensor as specified in its datasheet.
The datasheet outlines two voltage ranges:
Recommended supply voltage…
Part Number: TMP110 Tool/software:
I am seeking clarification on the layout considerations for the temperature sensor part number. Is it mandatory to follow the layout example provided in the datasheet?
One of the layouts we have designed omits…
Part Number: TMP110 Tool/software: An issue of "Power Disabled upon power up" came up, based on what the default ALERT output is at power up. Is ALERT = HiZ on power up, before it gets programmed.
Thanks,
Part Number: TMP110 Other Parts Discussed in Thread: LM95172-Q1 Tool/software: I am in the need of high temperature sensor more than 150 Deg C.
But the need is our operating pressure is 0 to 10000 PSI
Operating Pressure
0 to 10,000…
Part Number: TMP110 Other Parts Discussed in Thread: TMP101 , , TIGER , TMP112 Tool/software: Hi,
May I use below TMP101 linux driver for TMP110?
Or BU could provide dedicated Linux driver or sample code for TMP110x?
https://e2e.ti.com/support/sensors…
