Part Number: TMP114 Other Parts Discussed in Thread: TMP1075 , TMP144 , TMP107 , TMP112 Hello, For my application I am trying to gauge if I can use multiple TMP114s (more than 4) over SM Bus and if the uC can dynamically resolve the addresses of these sensors…
Part Number: TMP114 Hello,
I'd like to inquire about the contact method required for the TMP114 temperature sensor. Would it be feasible to use a metal conductor along with thermal adhesive for contact?
Regarding the type of metal, the size of the…
Part Number: TMP114 Hello,
My customer is using the TMP114 and is measuring an SCL fall time of ~6.1ns. They are using a VDD of 1.8V which means minimum SCL fall time is 6.5ns. Is there any concern with going a bit under this minimum and if so, would adding…
If the value is read every 5 seconds, the Configuration could be changed to 0.5 Hz rate to save power. This would not have any impact on the reported temperature value. The value for the Config register would be 0x0007
thanks,
ren
Part Number: TMP114 Hi team,
Customer get feedback about TMP114 I2C.
One pcs report I2C NACK. However, some time it would be normal.
Their schematic as attached, pull up resistor is 2.2kohm. Could you help check why this happen and how to solve this? …
Part Number: TMP114 Hi expert,
My customer has some quesions as below. Please kindly share some input to us, thank you.
Could you please share what's the main purpose why TMP114 has such function, and other products don't have it? We would like to understand…
Part Number: TMP114 Other Parts Discussed in Thread: TMP117 , TMP116 , TMP107 Hi,
Do any of the sensors support temperature flag setting with no I2C bus connected ?
We would like to power the device with the MCU disconnected over a long time, then plug…
Part Number: TMP114 Hi Team,
do we have any temperature sensor with a faster response time?
Ideally in the 2 digit millisecond range.
digital output is preferred.
BR, Stefan
Part Number: TMP114 Hi Sir,
My customer has a question about the response time of TMP114. Is it mean the user detects the temperature value once and needs to wait the response time once?
May I know if there have temp sensor device that can meet the below…
Part Number: TMP114 Hello,
Is it possible to pot these sensors using conductive thermal epoxy? Does TI have any experience/recommendations/technical papers on this? We would like to explore the possibility of potting these sensors into an aluminum heatsink…