Part Number: TMP119EVM When our TMP119EVM stopped working, we were surprized ase the chip looked like it had slid almost off its pads. It had been exposed to no more than 60°C, certainly not enough to melt solder. Our current theory is that our custom…
Part Number: TMP119EVM Tool/software: Hi,
I am having problems installing the driver to evaluate the sensor. On one of the first steps i am informed that the GUI Composer runtime is not installed.
My options are "download from web" (which does not…
Part Number: TMP119EVM Tool/software: I loaded the Windows version for offline use, and it seems to run OK, but I see things like Poling Rate, Device Rate, and have no clue what they mean! How do they effect the rate at which measurements are returned…
Part Number: TMP119EVM Other Parts Discussed in Thread: MSP430F5528 , TMP119
Tool/software:
Hi!
I recently bought a TMP119EVM module. Is it possible to read out the module eg with Matlab? If I see correctly, it intergates as a HID. I'm of course…
Part Number: TMP119EVM Other Parts Discussed in Thread: TMP119 , Tool/software: We have two TMP119 sensors from the evaluation module, but with the sensor detached at the perforations and wired to our own interface. I was comparing them to several J/K…
Part Number: TMP119EVM Other Parts Discussed in Thread: TMP117 , TMP119 Tool/software: I have a TMP119EVM board.
In PC GUI software it displays a temperature approx. 2 degrees higher that correct one.
D4 LED (red one) lights continuously
Part Number: TMP119EVM Other Parts Discussed in Thread: TMP119 , Tool/software: Hi,
I'd like to have support on the TMP119 EVM board.
https://www.ti.com/tool/TMP119EVM
I'd like to connect two of these sensors to my MCU detaching the sensor part…
Part Number: TMP119EVM Other Parts Discussed in Thread: TMP117EVM Tool/software: Hello,
Can you support the following question from my customer?
When I plug in the EVM to the USB it shows connecting. However, it always reads the same temperature at…
Part Number: TMP119EVM Tool/software: Hi I have a TMP119EVM problem same as Dan. A platinum 4 wire RTD connected to Keithley DMM6500 reads 23.94 and the GUI 25.93 degC (2 deg high).
Thanks for your help,
Greg
==========
Dan Neacsu
…
Part Number: TMP118EVM Other Parts Discussed in Thread: USB2ANY , TMP119EVM Tool/software: Hello,
Would it be possible to share the source code for the TMP118EVM GUI for Windows? I would like to modify the code so that I can have multiple TMP118EVM…
