Part Number: TMP122 I am using STM32 and connected TMP122 with MISO MOSI Shorted so On separate lines
I use full duplex mode as shown in below
SPI is configured as shown in following picture. I am able to read Temperature but sending command doesn't work…
Part Number: TMP122-EP Hi Experts,
Our customer have information request for TMP122AMDBVTEP. He needs ESD rating and test model (HB, MM, CDM)
Please provide if available and ok. Thank you.
Thank you and best regards, Gerald
Part Number: TMP122
Hi Team,
A customer wanna know if we have simulation model of Verilog RTL for TMP122 device.
Thank you for your clarification.
Regards,
Frank
Part Number: TMP122-EP Other Parts Discussed in Thread: TMP122 Hello,
We are using a TMP122-EP in oure design and need some clarification on the datasheet:
On page 5 in the section called " Communicating with the TMP122 " the datasheet states: "The…
Part Number: TMP122-EP Other Parts Discussed in Thread: TMP122 , Hi E2E,
Good day.
What is the TMP122AMDBVTEP ESD sensitivity/rating?
Thank you in advance.
Regards, Carlo
Part Number: TMP122 Other Parts Discussed in Thread: TMP124 Hello team,
one of my customers is redesigning a board and they are looking for a temperature sensor in the range -20 + 100 °C via SPI.
They saw the TMP122 and 124 devices but couldn't find…
Part Number: TMP122 Other Parts Discussed in Thread: TINA-TI , TMP121 , Tool/software: TINA-TI or Spice Models Hi Team,
My assigned account is requesting IBIS models for the TMP122AMDBVTEP and TPS3813K33MDBVREP.
None of these seem to have any simulation…
Part Number: TMP122 What are the program sequence for Changing Thigh and Tlow to make ALERT PIN Voltage Low?
The default Thigh = 80°C and Tlow=75°C.
When Temp. is 100°C, Alert Pin Voltage is Low.
How can I set Thigh =25°C and Tlow=0°C?…
