Part Number: TMP302 Tool/software: I assume there's an ESD diode from the /OUT pin to the Vs pin, or is there a voltage clamp on the /OUT pin?
I want the chip to ground/release the mid point on potential divider.
Under normal circumstances the voltage…
Part Number: TMP302 Hi,
May I know if we have analysis done on TMP302 with conformal coating? Do we have any concern on the accuracy impact after conformal coating?
Thanks,
Christina
Part Number: TMP302 Hello,
We're working with the TMP302 and seeing some differences when device trips.
Which pin on the IC is being monitored for temperature?
Does is matter the level of solder used? Or how far off the PCB the IC might be?
…
Part Number: TMP302 Hello,
We're using the TMP302 in an application and getting varying accuracy results.
Looking for some layout suggestions.
Which pin on the IC is used for temperature measurements?
Not able to connect up any pins on the IC…
Part Number: TMP302 Hi, the trip point accuracy for TMP302 is shown as +-0.2C typical, +-2C maximum.
+-0.2C would be brilliant for my application, but +-2C is not good. Can you provide any information about the difference between typical and maximum…
Part Number: TMP302-Q1 Hello Experts, My customer would like to know where the temp sensor is located in the chip. Would you tell it, please? Best Regards, Fujiwara
Part Number: TMP302 Hi, Team!
I need to install sensor TMP302 to D-pack diode width D-pack cooler.
How to install sensor TMP302 correctly? I use SMD mount and sensor TMP302 in
micropackage SOT563. How to provide termo connection? Maybe you have…
Part Number: TMP302 Hi
Below is my questions about TMP302.
1. TMP302 maximum output current is 10mA, in which conditions?
2. I want to drive TMP302 with VRTC, VRTC maximum output capacity is 2mA, when system is shutdown, consume 0.1mA, can 1.9mA…
